Hi Hans, Dmitry,

Am Donnerstag, 2. Januar 2014, 10:37:47 schrieb Hans de Goede:

Hi,

On 01/01/2014 09:56 PM, Dmitry Torokhov wrote:

quoted

Hi Hans,

On Wed, Jan 01, 2014 at 08:30:07PM +0100, Hans de Goede wrote:

quoted

+Required properties:
+ - compatible: "allwinner,sun4i-lradc-keys"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+ - allwinner,chan0-step: step in mV between keys must be 150 or 200
+ - allwinner,chan0-keycodes: array of include/uapi/linux/input.h KEY_
codes> 

I think this should be "linux,chan0-keycodes".

Right, because the codes are Linux specific, will fix in v2.

but the property with its "chan0-" thingy would be allwinner-specific if I'm 
not mistaken.

Also, instead of inventing yet another vendor-specific property, why not re-use 
a button binding similar to gpio-keys like:

       lradc: lradc@01c22800 {
               compatible = "allwinner,sun4i-lradc-keys";
               reg = <0x01c22800 0x100>;
               interrupts = <31>;
               allwinner,chan0-step = <200>;

		#address-cells = <1>;
		#size-cells = <0>;

		button@0 {
			reg = <0>; /* your channel index from above */
			linux,code = <115>; /* already used as dt-property */
		};

		button@1 {
			reg = <1>;
			linux,code = <114>;
		};

...

       };

But I may be on the wrong track here, so I've included the devicetree-people 
for help, which I guess should've been included from the beginning.


Heiko