This is version 3 of the driver for Bosch Sensortec's accelerometers BMA150
and SMB380.

Since last time around, the following has happened:
* community review: Register the driver as a input_polled_device.
* community review: added runtime_pm support.
* community review: removed sysfs enable node
* community review: removed the value sysfs node
* community review: rephrased delay sysfs description
* Removed mode sysfs node
* Removed delay sysfs node
* Listed both bma150 & smb380 as supported i2c device id's.
* Added hw initialization function which will be called upon probing.
* Added soft reset function to be called from the probe.
* Minor consistency changes.

-- 
Best regards,
 Eric

 http://www.unixphere.com


Eric Andersson (1):
  input: add driver for Bosch Sensortec's BMA150 accelerometer

 Documentation/ABI/testing/sysfs-i2c-bma150 |   22 +
 drivers/input/misc/Kconfig                 |   11 +
 drivers/input/misc/Makefile                |    1 +
 drivers/input/misc/bma150.c                |  577 ++++++++++++++++++++++++++++
 4 files changed, 611 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-i2c-bma150
 create mode 100644 drivers/input/misc/bma150.c

-- 
1.7.3.4