Re: [PATCH v6 08/18] mfd: twl6040: Add initial support

hi,

On Tue, Jun 21, 2011 at 04:39:06PM +0300, Peter Ujfalusi wrote:

+static int __devinit twl6040_probe(struct platform_device *pdev)
+{
+	struct twl4030_audio_data *pdata = pdev->dev.platform_data;
+	struct twl6040 *twl6040;
+	struct mfd_cell *cell = NULL;
+	int ret, children = 0;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Platform data is missing\n");
+		return -EINVAL;
+	}
+
+	twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL);
+	if (!twl6040)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, twl6040);
+
+	twl6040_dev = pdev;
+	twl6040->dev = &pdev->dev;
+	twl6040->audpwron = pdata->audpwron_gpio;
+	twl6040->irq = pdata->naudint_irq;
+	twl6040->irq_base = pdata->irq_base;
+
+	mutex_init(&twl6040->mutex);
+	mutex_init(&twl6040->io_mutex);
+	init_completion(&twl6040->ready);
+
+	twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
+
+	if (gpio_is_valid(twl6040->audpwron)) {
+		ret = gpio_request(twl6040->audpwron, "audpwron");
+		if (ret)
+			goto gpio1_err;
+
+		ret = gpio_direction_output(twl6040->audpwron, 0);
+		if (ret)
+			goto gpio2_err;
+	}
+
+	/* ERRATA: Automatic power-up is not possible in ES1.0 */
+	if (twl6040_get_rev(twl6040) == TWL6040_REV_ES1_0)
+		twl6040->audpwron = -EINVAL;
+
+	if (twl6040->irq) {
+		/* codec interrupt */
+		ret = twl6040_irq_init(twl6040);
+		if (ret)
+			goto gpio2_err;
+
+		ret = twl6040_request_irq(twl6040, TWL6040_IRQ_READY,
+					  twl6040_naudint_handler, 0,
+					  "twl6040_irq_ready", twl6040);

why don't you use the normal request_threaded_irq() ?? This is a bit of
obfuscation IMO.

-- 
balbi