Re: usb mouse not responding after resume

Started by Alan Stern on Jul 10, 2009

open the first message on its own page

Message details and related content
On Fri, 10 Jul 2009, K R I S K wrote:
Thanks Allan.

We need to look into the console messages of the bootloader rather than
dmesg's.
What bootloader?  What's the connection between booting and 
suspend/resume?
the second USB - mouse may not be resumed or initialized

solution one:

The resistor value may have to be changed ; for example in PPC the following
resistor values would release the reset to PPC
1. No install R670
2. Install R776
We're talking about a T60 notebook.  It doesn't use a PPC.
Second Solution:

The USB devices can be re-initialized after suspend or when resuming
by issuing the following sequence of commands: USB_STOP(),
DELAY(),USB_INIT()
in the bootloader's board specific file with in conditional High speed and
Lowspeed flags for USB.
What bootloader?  What board-specific file?

Besides, it won't help.  The log shows that the kernel did reset the 
USB controller.

Alan Stern
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help