Re: usb mouse not responding after resume

From
Alan Stern <stern@rowland.harvard.edu>
Date
2009-07-10 20:33:03
Also in
lkml
On Fri, 10 Jul 2009, K R I S K wrote:
Thanks Allan.

We need to look into the console messages of the bootloader rather than
dmesg's.
What bootloader?  What's the connection between booting and 
suspend/resume?
the second USB - mouse may not be resumed or initialized

solution one:

The resistor value may have to be changed ; for example in PPC the following
resistor values would release the reset to PPC
1. No install R670
2. Install R776
We're talking about a T60 notebook.  It doesn't use a PPC.
Second Solution:

The USB devices can be re-initialized after suspend or when resuming
by issuing the following sequence of commands: USB_STOP(),
DELAY(),USB_INIT()
in the bootloader's board specific file with in conditional High speed and
Lowspeed flags for USB.
What bootloader?  What board-specific file?

Besides, it won't help.  The log shows that the kernel did reset the 
USB controller.

Alan Stern
Thread (1 message) 1 message, 1 author, last reply 2009-07-10
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help