On Wed, 2007-08-01 at 19:58 +0400, Sergei Shtylyov wrote:

quoted

hpt37x: DPLL did not stabilize.
pata_hpt37x: BIOS has not set timing clocks.
hpt37x: DPLL did not stabilize.

   Yes, this ia a known issue, and the fix for it is in the -mm tree:

I applied just that pata_hpt37x.c patch, not the whole -mm tree.  It
locks the machine hard again.  Here is the transcribed output:

hpt37x: Bus clock 66 MHz, using DPLL.
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 17
scsi2: pata_hpt37x
scsi3: pata_hpt37x
ata3: PATA max UDMA/100 cmd 0x0001efa0 ctl 0x0001ef9e bmdma 0x0001ec00 irq 17
ata4: PATA max UDMA/100 cmd 0x0001ef90 ctl 0x0001ef9a bmdma 0x0001ec00 irq 17


-- 
Bob Ham [off-list ref]