Thread (25 messages) 25 messages, 5 authors, 2007-08-05

Re: hpt374 sata (Highpoint Rocket 1540)

From: Bob Ham <hidden>
Date: 2007-08-01 18:02:55

On Wed, 2007-08-01 at 19:58 +0400, Sergei Shtylyov wrote:
Bob Ham wrote:
quoted
quoted
quoted
quoted
quoted
quoted
quoted
I've had a Highpoint Rocket 1540 (not "RocketRAID") SATA controller for
a while now, using a proprietary binary driver from Highpoint in a linux
2.4 kernel.  The chipset is an hpt374.  The hpt366 driver freezes on
boot, as reported by others.
quoted
quoted
quoted
quoted
quoted
quoted
 Can we see a bootlog please?
quoted
quoted
quoted
quoted
quoted
  ... and the output of 'lspci -v' too.
quoted
quoted
   If possible, turn off that driver, 
then post that output...
quoted
This is the output of the boot using the pata_hpt37x driver:
    Hrm... what I asked for was 'lspci -v' output. :-)
On Tue, 2007-07-31 at 22:22 +0100, Bob Ham wrote: 
lspci gives:

00:0d.0 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
        Subsystem: Triones Technologies, Inc. Unknown device 0001
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
        I/O ports at efa0 [size=8]
        I/O ports at ef9c [size=4]
        I/O ports at ef90 [size=8]
        I/O ports at ef98 [size=4]
        I/O ports at ec00 [size=256]
        Expansion ROM at fe700000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2

00:0d.1 RAID bus controller: Triones Technologies, Inc. HPT374 (rev 07)
        Subsystem: Triones Technologies, Inc. Unknown device 0001
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
        I/O ports at eff0 [size=8]
        I/O ports at efe4 [size=4]
        I/O ports at efa8 [size=8]
        I/O ports at efe0 [size=4]
        I/O ports at ed00 [size=256]
        Capabilities: [60] Power Management version 2

I'll check out the patch you pointed to.

-- 
Bob Ham [off-list ref]

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help