Re: IDE hackery: lock fixes and hotplug controller stuff

On Tuesday 10 Aug 2004 22:06, Alan Cox wrote:

On Tue, Aug 10, 2004 at 09:48:57PM +0100, Ian Hastie wrote:

quoted

What do those numbers refer to?  Card model numbers?  On ITE's site I can
only see an IT8212F which has RAID and an IT8211F that doesn't.

Product rather than chip numbers I think

quoted

I got my IT8212F card from Novatech.  A generic card with no obviously
recognisable name and, IMO anyway, quite a reasonable price.  That is
assuming it really does everything that they say it can.

Thanks will investigate. I need to see what happens if I turn the
firmware bits on with my card and then reboot the microprocessor - see if
its just bios crippled

quoted

It certainly works quite well in pass through mode. *8)

But it has the raid mode stuff ?

Yes it does.  It's certainly sold as a RAID card and it does have a RAID setup 
menu.  I haven't had the opportunity to use it fully as the discs I needed to 
use on it were already set up for software RAID.  Maybe I'll have a couple 
spare(!) discs to play with if I upgrade to SATA.

It seems that the operation depends on the firmware, or should that be BIOS, 
you load onto the card.  There's this from the IT8212 FAQ, 
http://www.ite.com.tw/faq/it8212.html

1. Could I use IT8212 for CD-ROM? 
Ans:  IT8212 supports either RAID controller (which supports hard drives
only) or pure IDE controller (which supports hard drives and CDROM)
with different BIOS code. Please update your BIOS ROM with ATAPI
BIOS.

There are certainly two files available

http://www.ite.com.tw/pc/bios_8212Raid-093015-02.zip

and

http://www.ite.com.tw/pc/bios_8212ATAPI-093015-02.zip

-- 
Ian.