Re: [PATCH v2 1/3] pinctrl: cherryview: Don't use pin/offset 0 to mark an... | linux-gpio

[PATCH v2 1/3] pinctrl: cherryview: Don't use pin/offset 0 to mark an interrupt line as unused · Hans de Goede <hidden> · 2021-11-18
[PATCH v2 2/3] pinctrl: cherryview: Do not allow the same interrupt line to be used by 2 pins · Hans de Goede <hidden> · 2021-11-18
Re: [PATCH v2 2/3] pinctrl: cherryview: Do not allow the same interrupt line to be used by 2 pins · Mika Westerberg <mika.westerberg@linux.intel.com> · 2021-11-18
Re: [PATCH v2 2/3] pinctrl: cherryview: Do not allow the same interrupt line to be used by 2 pins · Andy Shevchenko <hidden> · 2021-11-26
[PATCH v2 3/3] pinctrl: cherryview: Ignore INT33FF UID 5 ACPI device · Hans de Goede <hidden> · 2021-11-18
Re: [PATCH v2 3/3] pinctrl: cherryview: Ignore INT33FF UID 5 ACPI device · Andy Shevchenko <hidden> · 2021-11-18
Re: [PATCH v2 3/3] pinctrl: cherryview: Ignore INT33FF UID 5 ACPI device · Andy Shevchenko <hidden> · 2021-11-26
Re: [PATCH v2 3/3] pinctrl: cherryview: Ignore INT33FF UID 5 ACPI device · Hans de Goede <hidden> · 2021-11-27
Re: [PATCH v2 3/3] pinctrl: cherryview: Ignore INT33FF UID 5 ACPI device · Andy Shevchenko <hidden> · 2022-01-13
Re: [PATCH v2 1/3] pinctrl: cherryview: Don't use pin/offset 0 to mark an interrupt line as unused · Mika Westerberg <mika.westerberg@linux.intel.com> · 2021-11-18
Re: [PATCH v2 1/3] pinctrl: cherryview: Don't use pin/offset 0 to mark an interrupt line as unused · Andy Shevchenko <hidden> · 2021-11-26
Re: [PATCH v2 1/3] pinctrl: cherryview: Don't use pin/offset 0 to mark an interrupt line as unused · Andy Shevchenko <hidden> · 2021-11-18
Re: [PATCH v2 1/3] pinctrl: cherryview: Don't use pin/offset 0 to mark an interrupt line as unused · Andy Shevchenko <hidden> · 2021-11-26
Re: [PATCH v2 1/3] pinctrl: cherryview: Don't use pin/offset 0 to mark an interrupt line as unused · Hans de Goede <hidden> · 2021-11-27

Re: [PATCH v2 1/3] pinctrl: cherryview: Don't use pin/offset 0 to mark an interrupt line as unused

From: Mika Westerberg <mika.westerberg@linux.intel.com>
Date: 2021-11-18 11:17:44
Also in: linux-acpi

On Thu, Nov 18, 2021 at 11:56:48AM +0100, Hans de Goede wrote:

Offset/pin 0 is a perfectly valid offset, so stop using it to have
the special meaning of interrupt line not used in the intr_lines.

Instead introduce a new special INTR_LINE_UNUSED value which is never
a valid offset and use that to indicate unused interrupt lines.

Cc: Yauhen Kharuzhy <redacted>
Signed-off-by: Hans de Goede <redacted>

Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help