Thread (32 messages) 32 messages, 4 authors, 2021-06-15

Re: [PATCH 1/8] dt-bindings: qcom: rpmh-regulator: Add compatible for SA8155p-adp board pmics

From: Bhupesh Sharma <hidden>
Date: 2021-06-14 08:07:16
Also in: linux-arm-msm, linux-devicetree, lkml

Hello Bjorn,

Thanks for the review comments.

On Fri, 11 Jun 2021 at 08:18, Bjorn Andersson
[off-list ref] wrote:
On Mon 07 Jun 06:38 CDT 2021, Bhupesh Sharma wrote:
quoted
Add compatible strings for pmm8155au_1 and pmm8155au_2 pmics
found on SA8155p-adp board.

Cc: Linus Walleij <redacted>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Bjorn Andersson <redacted>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: bhupesh.linux@gmail.com
Signed-off-by: Bhupesh Sharma <redacted>
---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml      | 2 ++
 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index e561a5b941e4..ea5cd71aa0c7 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -55,6 +55,8 @@ properties:
       - qcom,pm8009-1-rpmh-regulators
       - qcom,pm8150-rpmh-regulators
       - qcom,pm8150l-rpmh-regulators
+      - qcom,pmm8155au-1-rpmh-regulators
+      - qcom,pmm8155au-2-rpmh-regulators
Looking at the component documentation and the schematics I think the
component is "PMM8155AU" and we have two of them.

Unless I'm mistaken we should have the compatible describe the single
component and we should have DT describe the fact that we have 2 of
them.
If we refer to the PM8155AU device specifications, there are two
regulators mentioned there PMM8155AU_1 and PMM8155AU_2. Although most
parameters of the regulators seem similar the smps regulator summary
for both appear different (Transient Load, mA ratings etc).

Although most of these differences don't probably matter to the Linux
world, others like the gpios on the pmic are different.

So, IMO, it makes sense to mention the different pmic types on the board.

Please let me know your views on the same.

Thanks,
Bhupesh
quoted
       - qcom,pm8350-rpmh-regulators
       - qcom,pm8350c-rpmh-regulators
       - qcom,pm8998-rpmh-regulators
--
2.31.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help