Re: [PATCH v3 5/6] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings

+++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml

@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Lattice CPLD onboard the TN48M switches is used for system
+  management.
+
+  It provides information about the hardware model, revision,
+  PSU status etc.
+
+  It is also being used as a GPIO expander for the SFP slots and
+  reset controller for the switch MAC-s and other peripherals.
+
+properties:
+  compatible:
+    const: delta,tn48m-cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/delta,tn48m-gpio.yaml
+
+  "^reset-controller?$":
+    $ref: ../reset/delta,tn48m-reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpld@41 {
+            compatible = "delta,tn48m-cpld";
+            reg = <0x41>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@31 {
+                compatible = "delta,tn48m-gpio-sfp-tx-disable";
+                reg = <0x31>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@3a {
+                compatible = "delta,tn48m-gpio-sfp-present";
+                reg = <0x3a>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@40 {
+                compatible = "delta,tn48m-gpio-sfp-los";
+                reg = <0x40>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            reset-controller {
+              compatible = "delta,tn48m-reset";
+              #reset-cells = <1>;
+            };