Thread (4 messages) 4 messages, 3 authors, 2021-05-24

Re: [PATCH v2 2/3] gpio: gpio-regmap: Use devm_add_action()

From: Vaittinen, Matti <hidden>
Date: 2021-05-21 10:32:35
Also in: lkml

On Fri, 2021-05-21 at 10:38 +0200, Bjørn Mork wrote:
Michael Walle [off-list ref] writes:
quoted
Am 2021-05-21 08:28, schrieb Matti Vaittinen:
quoted
Slightly simplify the devm_gpio_regmap_register() by using the
devm_add_action().
Hm, nice, but what bothers me a bit is that no other subsystem
does it that way, eg. hwmon/hwmon.c or watchdog/watchdog_core.c.
They also store just one pointer, thus could be simplified in the
same way. What I don't know is if devm_add_action() was intended
to be used this way. So I can't say much for this patch ;)
There are some examples.  Like:

int devm_i2c_add_adapter(struct device *dev, struct i2c_adapter
*adapter)
{
        int ret;

        ret = i2c_add_adapter(adapter);
        if (ret)
                return ret;

        return devm_add_action_or_reset(dev, devm_i2c_del_adapter,
adapter);
}


You should probably use the devm_add_action_or_reset() wrapper here
too,
catching the unlikely devm_add_action() alloc failure.
I was thinking of it but as the gpio registration succeeded I was
thinking that we could go on with it - (which means we can proceed but
the gpio is never released.)

I am not sure how much difference it makes in the case of small alloc
failure ;)

But as it seems I am in any case re-spinning this I can change this to
the devm_add_action_or_reset() and fail the gpio_regmap registration if
alloc fails.

Best Regards
	Matti Vaittinen
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help