Re: [PATCH v5 2/7] gpio: ep93xx: Fix single irqchip with multi gpiochips
From: Nikita Shubin <nikita.shubin@maquefel.me>
Date: 2021-02-09 12:36:51
Also in:
lkml
Hello Andy. On Monday, 8 February 2021 16:20:17 MSK Andy Shevchenko wrote:
On Mon, Feb 8, 2021 at 11:00 AM Nikita Shubin
[off-list ref] wrote:
quoted
Fixes the following warnings which results in interrupts disabled on port B/F: gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver. - added separate irqchip for each interrupt capable gpiochip - provided unique names for each irqchip...quoted
+static void ep93xx_init_irq_chip(struct device *dev, struct irq_chip *ic, const char *label) +{ + ic->name = devm_kasprintf(dev, GFP_KERNEL, "gpio-irq-%s", label);Is the label being NULL okay?
The label is taken from ep93xx_gpio_banks[], so unless we explicitly pass zero to ep93xx_init_irq_chip(), we are ok.
quoted
+ ic->irq_ack = ep93xx_gpio_irq_ack; + ic->irq_mask_ack = ep93xx_gpio_irq_mask_ack; + ic->irq_mask = ep93xx_gpio_irq_mask; + ic->irq_unmask = ep93xx_gpio_irq_unmask; + ic->irq_set_type = ep93xx_gpio_irq_type; +}...quoted
- girq->chip = &ep93xx_gpio_irq_chip;I don't see where you remove that static structure.
Good catch - thank you very much, also i noticed that i forgot to switch IRQ chip in irq_set_chip_and_handler() for port F.