[PATCH v3 5/6] ARM: shmobile: lager: Set clock rates for SDHI
From: Ben Hutchings <hidden>
Date: 2015-06-26 15:23:50
Also in:
linux-mmc, linux-sh
Subsystem:
the rest · Maintainer:
Linus Torvalds
Set the input clocks to the highest supported speeds. Signed-off-by: Ben Hutchings <redacted> --- arch/arm/boot/dts/r8a7790-lager.dts | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index aaa4f258e279..5f68e53c58ae 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts@@ -488,6 +488,9 @@ pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; + assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; + assigned-clock-rates = <156000000>; + vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
@@ -498,6 +501,9 @@ pinctrl-0 = <&sdhi2_pins>; pinctrl-names = "default"; + assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; + assigned-clock-rates = <97500000>; + vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
--
2.1.4