[PATCH v3 3/6] pinctrl: sh-pfc: r8a7790: Implement voltage switching for SDHI

@@ -92,7 +92,7 @@ static int sh_pfc_map_resources(struct sh_pfc *pfc,
 	return 0;
 }
 
-static void __iomem *sh_pfc_phys_to_virt(struct sh_pfc *pfc, u32 reg)
+void __iomem *sh_pfc_phys_to_virt(struct sh_pfc *pfc, u32 reg)
 {
 	struct sh_pfc_window *window;
 	phys_addr_t address = reg;

@@ -57,6 +57,7 @@ int sh_pfc_unregister_gpiochip(struct sh_pfc *pfc);
 int sh_pfc_register_pinctrl(struct sh_pfc *pfc);
 int sh_pfc_unregister_pinctrl(struct sh_pfc *pfc);
 
+void __iomem *sh_pfc_phys_to_virt(struct sh_pfc *pfc, u32 address);
 u32 sh_pfc_read_raw_reg(void __iomem *mapped_reg, unsigned int reg_width);
 void sh_pfc_write_raw_reg(void __iomem *mapped_reg, unsigned int reg_width,
 			  u32 data);

@@ -1739,10 +1739,20 @@ static const u16 pinmux_data[] = {
 #define PIN_NUMBER(r, c) (((r) - 'A') * 31 + (c) + 200)
 #define PIN_A_NUMBER(r, c) PIN_NUMBER(ROW_GROUP_A(r), c)
 
+#define PIN_LOW_VOLTAGE(bank, _pin, _name, sfx)		\
+	[RCAR_GP_PIN(bank, _pin)].configs = SH_PFC_PIN_CFG_LOW_VOLTAGE
+
 static const struct sh_pfc_pin pinmux_pins[] = {
 	PINMUX_GPIO_GP_ALL(),
 
-	/* Pins not associated with a GPIO port */
+	/*
+	 * All pins assigned to GPIO bank 3 can be used for SD interfaces
+	 * in which case they support low voltage (1.8V) signalling.
+	 */
+	PORT_GP_32(3, PIN_LOW_VOLTAGE, unused),
+
+	/* Pins not associated with a GPIO port, placed after all the GPIOs */
+	[RCAR_GP_PIN(5, 31) + 1] =
 	SH_PFC_PIN_NAMED(ROW_GROUP_A('F'), 15, AF15),
 	SH_PFC_PIN_NAMED(ROW_GROUP_A('G'), 15, AG15),
 	SH_PFC_PIN_NAMED(ROW_GROUP_A('H'), 15, AH15),

@@ -4595,6 +4605,55 @@ static const char * const vin3_groups[] = {
 	"vin3_clk",
 };
 
+static bool sdhi_get_low_voltage(struct sh_pfc *pfc, unsigned int pin)
+{
+	void __iomem *mapped_reg;
+	u32 data, mask;
+
+	if (WARN(pin < RCAR_GP_PIN(3, 0) || pin > RCAR_GP_PIN(3, 31),
+		 "sdhi_get_low_voltage: invalid pin %#x", pin))
+		return 0;
+
+	/* Map IOCTRL6 */
+	mapped_reg = sh_pfc_phys_to_virt(pfc, 0xe606008c);
+
+	/* Bits in IOCTRL6 are numbered in opposite order to pins */
+	mask = 0x80000000 >> (pin & 0x1f);
+
+	data = sh_pfc_read_raw_reg(mapped_reg, 32);
+
+	return !(data & mask);
+}
+
+static void
+sdhi_set_low_voltage(struct sh_pfc *pfc, unsigned int pin, bool low)
+{
+	void __iomem *mapped_reg;
+	u32 data, mask;
+
+	if (WARN(pin < RCAR_GP_PIN(3, 0) || pin > RCAR_GP_PIN(3, 31),
+		 "sdhi_set_low_voltage: invalid pin %#x", pin))
+		return;
+
+	/* Map IOCTRL6 */
+	mapped_reg = sh_pfc_phys_to_virt(pfc, 0xe606008c);
+
+	/* Bits in IOCTRL6 are numbered in opposite order to pins */
+	mask = 0x80000000 >> (pin & 0x1f);
+
+	data = sh_pfc_read_raw_reg(mapped_reg, 32);
+
+	if (low)
+		data &= ~mask;
+	else
+		data |= mask;
+
+	sh_pfc_write_raw_reg(
+		sh_pfc_phys_to_virt(pfc, pfc->info->unlock_reg), 32,
+		~data);
+	sh_pfc_write_raw_reg(mapped_reg, 32, data);
+}
+
 static const struct sh_pfc_function pinmux_functions[] = {
 	SH_PFC_FUNCTION(audio_clk),
 	SH_PFC_FUNCTION(avb),

@@ -5586,8 +5645,14 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	{ },
 };
 
+static const struct sh_pfc_soc_operations pinmux_ops = {
+	.get_low_voltage = sdhi_get_low_voltage,
+	.set_low_voltage = sdhi_set_low_voltage,
+};
+
 const struct sh_pfc_soc_info r8a7790_pinmux_info = {
 	.name = "r8a77900_pfc",
+	.ops = &pinmux_ops,
 	.unlock_reg = 0xe6060000, /* PMMR */
 
 	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },