On Fri, 2015-06-12 at 22:07 +0300, Laurent Pinchart wrote:

Hi Ben,

On Friday 12 June 2015 14:23:55 Ben Hutchings wrote:

quoted

On Fri, 2015-06-12 at 10:18 +0300, Laurent Pinchart wrote:

quoted

Hi Ben,

(CC'ing Linus Walleij)

Thank you for the patch.

On Wednesday 10 June 2015 00:23:31 Ben Hutchings wrote:

quoted

All the SHDIs can operate with either 3.3V or 1.8V signals, depending
on negotiation with the card.

Add separate functions for the 1.8V mode, and implement the set_mux
operation on all SDHI functions to configure the voltage for each
group of pins.

I don't think duplicating all functions for 1.8V and 3.3V is the right way
to go. Can't we use the pinconf API instead, and in particular the
PIN_CONFIG_POWER_SOURCE configuration ?

[...]

So far as I could see, you can't use the pinconf API with pinmux groups.

Can't you ? Both Documentation/devicetree/bindings/pinctrl/pinctrl-
bindings.txt and Documentation/devicetree/bindings/pinctrl/renesas,pfc-
pinctrl.txt document the usage of pinconf with groups (see for instance 
example 3 in the latter).

Sorry, I should say you can't use them with pinmux *functions*.  You can
either bind a group to a function *or* set the various pinconf
properties for the group, but not both.  Unless I'm very much mistaken.

Ben.