Re: [PATCH 8/9] iio: adc: ad7606: fix oversampling gpio array

Resend, previous mail was erroneously sent in HTML. I apologize for the 
spamming.

On 6/23/24 17:45, Jonathan Cameron wrote:

 > On Tue, 18 Jun 2024 14:02:40 +0000
 > Guillaume Stols [off-list ref] wrote:
 >> gpiod_set_array_value was misused here: the implementation relied on the
 >> assumption that an unsigned long was required for each gpio, while the
 >> function expects a bit array stored in "as much unsigned long as needed
 >> for storing one bit per GPIO", i.e it is using a bit field.
 >>
 >> Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC")
 >> Signed-off-by: Guillaume Stols [off-list ref]
 > Always drag fixes to the start of a series.  Probably doesn't matter
 > in this case but we want it to be obvious there are no necessary 
precursors
 > in this series for anyone backporting.

OK will do this change in the next version.

 >
 > What is the user visible outcome of this bug?  Superficially the numbers
 > all end up the same I think even though the code is clearly working
 > mostly by luck.  So might not warrant a fixes tag?

This is leading into some issues I should maybe have better documented 
in the commit message.

See below

 >
 >> ---
 >>   drivers/iio/adc/ad7606.c     | 4 ++--
 >>   drivers/iio/adc/ad7606_spi.c | 5 +++--
 >>   2 files changed, 5 insertions(+), 4 deletions(-)
 >>
 >> diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
 >> index e3426287edf6..502344e019e0 100644
 >> --- a/drivers/iio/adc/ad7606.c
 >> +++ b/drivers/iio/adc/ad7606.c
 >> @@ -235,9 +235,9 @@ static int ad7606_write_os_hw(struct iio_dev 
*indio_dev, int val)
 >>       struct ad7606_state *st = iio_priv(indio_dev);
 >>       DECLARE_BITMAP(values, 3);
 >>   -    values[0] = val;
 >> +    values[0] = val & GENMASK(2, 0);
 >>   -    gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
 >> +    gpiod_set_array_value(st->gpio_os->ndescs, st->gpio_os->desc,
 >>                     st->gpio_os->info, values);

ARRAY_SIZE(values) is 1 because DECLARE_BITMAP will declare a dimension 
1 unsigned long array (more than enough for 3 bits !).
We want to set 3 bits in gpiod_set_array_value, thus the first parameter 
should be 3, not 1.

 >>         /* AD7616 requires a reset to update value */
 >> diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c
 >> index 263a778bcf25..287a0591533b 100644
 >> --- a/drivers/iio/adc/ad7606_spi.c
 >> +++ b/drivers/iio/adc/ad7606_spi.c
 >> @@ -249,8 +249,9 @@ static int ad7616_sw_mode_config(struct iio_dev 
*indio_dev)
 >>   static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
 >>   {
 >>       struct ad7606_state *st = iio_priv(indio_dev);
 >> -    unsigned long os[3] = {1};
 >> +    DECLARE_BITMAP(os, 3);
 >>   +    bitmap_fill(os, 3);

Here we need 3 bits set HIGH in one unsigned long (i.e 0x07) and we get 
3 times 0x01 instead.

Thus, it will not switch to software mode if OS pins are not hardwired 
(which is I must admit, rather unlikely).

 >>       /*
 >>        * Software mode is enabled when all three oversampling
 >>        * pins are set to high. If oversampling gpios are defined
 >> @@ -258,7 +259,7 @@ static int ad7606B_sw_mode_config(struct iio_dev 
*indio_dev)
 >>        * otherwise, they must be hardwired to VDD
 >>        */
 >>       if (st->gpio_os) {
 >> -        gpiod_set_array_value(ARRAY_SIZE(os),
 >> +        gpiod_set_array_value(st->gpio_os->ndescs,
 >>                         st->gpio_os->desc, st->gpio_os->info, os);
 >>       }
 >>       /* OS of 128 and 256 are available only in software mode */
 >>