Re: [PATCH 4/9] dt-bindings: iio: adc: adi,ad7606: add supply properties

On Tue, Jun 18, 2024 at 05:33:16PM +0200, Guillaume Stols wrote:

On 6/18/24 17:12, Conor Dooley wrote:

quoted

On Tue, Jun 18, 2024 at 02:02:36PM +0000, Guillaume Stols wrote:

quoted

Add voltage supplies

Are these available on all devices?

Yes all chips from  AD7606 series (including AD7606B, AD7606C(-16,-18),
AD7605-4, AD7606 (-4,-8,-6), AD7607, AD7608, AD7609), as well as AD7616
have a VDrive pin, as well as a RefSelect + RefIn/RefOut pin that takes
an input voltage in case RefSelect is high, or outputs the internal
reference voltage if RefSelect is low.

Okay,
Acked-by: Conor Dooley <conor.dooley@microchip.com>
provided that...

quoted

quoted

Signed-off-by: Guillaume Stols <redacted>
---
  Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 9 +++++++++
  1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 80866940123c..e480c9a7c7ca 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml

@@ -35,6 +35,15 @@ properties:
    avcc-supply: true
+  vdrive-supply:

The lack of a blank line here is an artifact of the reply

quoted

quoted

+    description:
+      Determines the voltage level at which the interface logic pins will
+      operate.
+
+  refin-supply:
+    description:
+      The voltage supply for optional external reference voltage.
+
    interrupts:
      description:
        The BUSY pin falling edge indicates that the conversion is over, and thus

-- 
2.34.1