[PATCH 5/8] firmware/sysfb: Create firmware device only for enabled PCI devices
From: Thomas Zimmermann <tzimmermann@suse.de>
Date: 2024-01-17 12:56:15
Also in:
dri-devel
Subsystem:
drm driver for firmware framebuffers, the rest · Maintainers:
Thomas Zimmermann, Javier Martinez Canillas, Linus Torvalds
Test if the firmware framebuffer's parent PCI device, if any, has been enabled. If not, the firmware framebuffer is most likely not working. Hence, do not create a device for the firmware framebuffer on disabled PCI devices. So far, efifb tracked the status of the PCI parent device internally and did not bind if it was disabled. This patch implements the functionality for all firmware framebuffers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> --- drivers/firmware/sysfb.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/sysfb.c b/drivers/firmware/sysfb.c
index 8a42da3f67a9..48a550bd1a93 100644
--- a/drivers/firmware/sysfb.c
+++ b/drivers/firmware/sysfb.c@@ -70,6 +70,27 @@ void sysfb_disable(void) } EXPORT_SYMBOL_GPL(sysfb_disable); +static __init bool sysfb_pci_dev_is_enabled(struct pci_dev *pdev) +{ +#if defined(CONFIG_PCI) + /* + * TODO: Try to integrate this code into the PCI subsystem + */ + int ret; + u16 command; + + ret = pci_read_config_word(pdev, PCI_COMMAND, &command); + if (ret != PCIBIOS_SUCCESSFUL) + return false; + if (!(command & PCI_COMMAND_MEMORY)) + return false; + return true; +#else + // Getting here without PCI support is probably a bug. + return false; +#endif +} + static __init int sysfb_init(void) { const struct screen_info *si = &screen_info;
@@ -87,8 +108,11 @@ static __init int sysfb_init(void) sysfb_apply_efi_quirks(); pparent = screen_info_pci_dev(si); - if (pparent) + if (pparent) { + if (!sysfb_pci_dev_is_enabled(pparent)) + goto unlock_mutex; parent = &pparent->dev; + } /* try to create a simple-framebuffer device */ compatible = sysfb_parse_mode(si, &mode);
--
2.43.0