@@ -1822,19 +1822,17 @@ config FB_SH_MOBILE_LCDC
 config FB_S3C
 	tristate "Samsung S3C framebuffer support"
 	depends on FB && HAVE_CLK && HAS_IOMEM
-	depends on (CPU_S3C2416 || ARCH_S3C64XX) || COMPILE_TEST
+	depends on ARCH_S3C64XX || COMPILE_TEST
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	help
 	  Frame buffer driver for the built-in FB controller in the Samsung
-	  SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
-	  and the S3C64XX series such as the S3C6400 and S3C6410.
+	  SoC line such as the S3C6400 and S3C6410.
 
 	  These chips all have the same basic framebuffer design with the
-	  actual capabilities depending on the chip. For instance the S3C6400
-	  and S3C6410 support 4 hardware windows whereas the S3C24XX series
-	  currently only have two.
+	  actual capabilities depending on the chip. The S3C6400
+	  and S3C6410 support 4 hardware windows.
 
 	  Currently the support is only for the S3C6400 and S3C6410 SoCs.
 

@@ -1844,29 +1842,6 @@ config FB_S3C_DEBUG_REGWRITE
 	help
 	  Show all register writes via pr_debug()
 
-config FB_S3C2410
-	tristate "S3C2410 LCD framebuffer support"
-	depends on FB && ARCH_S3C24XX
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Frame buffer driver for the built-in LCD controller in the Samsung
-	  S3C2410 processor.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called s3c2410fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.rst>.
-
-	  If unsure, say N.
-config FB_S3C2410_DEBUG
-	bool "S3C2410 lcd debug messages"
-	depends on FB_S3C2410
-	help
-	  Turn on debugging messages. Note that you can set/unset at run time
-	  through sysfs
-
 config FB_SM501
 	tristate "Silicon Motion SM501 framebuffer support"
 	depends on FB && MFD_SM501

@@ -98,7 +98,6 @@ obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
 obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
 obj-$(CONFIG_FB_IMX)              += imxfb.o
 obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
 obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
 obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o