On Sun, Jul 17, 2022 at 10:46:43AM +0200, Pavel Machek wrote:

Hi!

quoted

The MediaTek MT6370 is a highly-integrated smart power management IC,
which includes a single cell Li-Ion/Li-Polymer switching battery
charger, a USB Type-C & Power Delivery (PD) controller, dual
Flash LED current sources, a RGB LED driver, a backlight WLED driver,
a display bias driver and a general LDO for portable devices.

In MediaTek MT6370, there are four channel current-sink RGB LEDs that
support hardware pattern for constant current, PWM, and breath mode.
Isink4 channel can also be used as a CHG_VIN power good indicator.

Signed-off-by: ChiYuan Huang <redacted>

quoted

index a49979f..71bacb5 100644

--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig

@@ -244,6 +244,20 @@ config LEDS_MT6323
 	  This option enables support for on-chip LED drivers found on
 	  Mediatek MT6323 PMIC.
 
+config LEDS_MT6370_RGB
+	tristate "LED Support for MediaTek MT6370 PMIC"
+	depends on LEDS_CLASS
+	depends on MFD_MT6370
+	select LINEAR_RANGE
+	help
+	  Say Y here to enable support for MT6370_RGB LED device.
+	  In MT6370, there are four channel current-sink LED drivers that
+	  support hardware pattern for constant current, PWM, and breath mode.
+	  Isink4 channel can also be used as a CHG_VIN power good

Should this go to leds/rgb directory, and should it depend on
multicolor framework?

Yes, and I may also want to change the file name from 'leds-mt6370'
to 'leds-mt6370-rgb'. Is it ok?

Best regards,
							Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.