From: Markus Schneider-Pargmann <msp@baylibre.com>

DPINTF is similar to DPI but does not have the exact same feature set
or register layouts.

DPINTF is the sink of the display pipeline that is connected to the
DisplayPort controller and encoder unit. It takes the same clocks as
DPI.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <redacted>
---
 .../bindings/display/mediatek/mediatek,dpi.yaml     | 13 ++++++++---
--
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git
a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam
l
b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam
l
index dd2896a40ff0..6d9f6c11806e 100644
---
a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam
l
+++
b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yam
l

@@ -4,16 +4,16 @@
 $id: 

http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: mediatek DPI/DPINTF Controller
 
 maintainers:
   - CK Hu [off-list ref]
   - Jitao shi [off-list ref]
 
 description: |
-  The Mediatek DPI function block is a sink of the display subsystem
and
-  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
parallel
-  output bus.
+  The Mediatek DPI and DPINTF function blocks are a sink of the
display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422
pixel data on a
+  parallel output bus.
 
 properties:
   compatible:

@@ -23,6 +23,7 @@ properties:
       - mediatek,mt8173-dpi
       - mediatek,mt8183-dpi
       - mediatek,mt8192-dpi
+      - mediatek,mt8195-dpintf
 
   reg:
     maxItems: 1

@@ -35,12 +36,14 @@ properties:
       - description: Pixel Clock
       - description: Engine Clock
       - description: DPI PLL
+      - description: Optional CK CG Clock
 
   clock-names:
     items:
       - const: pixel
       - const: engine
       - const: pll
+      - const: ck_cg

 
   pinctrl-0: true
   pinctrl-1: true

@@ -54,7 +57,7 @@ properties:
     $ref: /schemas/graph.yaml#/properties/port
     description:
       Output port node. This port should be connected to the input

port of an
-      attached HDMI or LVDS encoder chip.
+      attached HDMI, LVDS or DisplayPort encoder chip.
 
 required:
   - compatible