[PATCH v10 01/21] dt-bindings: mediatek,dpi: Add DPINTF compatible
From: Guillaume Ranquet <hidden>
Date: 2022-05-23 10:50:27
Also in:
dri-devel, linux-arm-kernel, linux-devicetree, linux-mediatek, linux-phy, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for mediatek, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Chun-Kuang Hu, Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Markus Schneider-Pargmann <msp@baylibre.com> DPINTF is similar to DPI but does not have the exact same feature set or register layouts. DPINTF is the sink of the display pipeline that is connected to the DisplayPort controller and encoder unit. It takes the same clocks as DPI. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Guillaume Ranquet <redacted> --- .../bindings/display/mediatek/mediatek,dpi.yaml | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..6d9f6c11806e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml@@ -4,16 +4,16 @@ $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: mediatek DPI Controller Device Tree Bindings +title: mediatek DPI/DPINTF Controller maintainers: - CK Hu <ck.hu@mediatek.com> - Jitao shi <jitao.shi@mediatek.com> description: | - The Mediatek DPI function block is a sink of the display subsystem and - provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel - output bus. + The Mediatek DPI and DPINTF function blocks are a sink of the display + subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a + parallel output bus. properties: compatible:
@@ -23,6 +23,7 @@ properties: - mediatek,mt8173-dpi - mediatek,mt8183-dpi - mediatek,mt8192-dpi + - mediatek,mt8195-dpintf reg: maxItems: 1
@@ -35,12 +36,14 @@ properties: - description: Pixel Clock - description: Engine Clock - description: DPI PLL + - description: Optional CK CG Clock clock-names: items: - const: pixel - const: engine - const: pll + - const: ck_cg pinctrl-0: true pinctrl-1: true
@@ -54,7 +57,7 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: Output port node. This port should be connected to the input port of an - attached HDMI or LVDS encoder chip. + attached HDMI, LVDS or DisplayPort encoder chip. required: - compatible
--
2.35.1