Re: [PATCH v3 2/4] backlight: Expose brightness curve type through sysfs

On Fri, Aug 16, 2019 at 10:51:57AM -0700, Matthias Kaehlcke wrote:

Hi Uwe,

On Fri, Aug 16, 2019 at 06:51:48PM +0200, Uwe Kleine-König wrote:

quoted

On Tue, Jul 09, 2019 at 12:00:05PM -0700, Matthias Kaehlcke wrote:

quoted

Backlight brightness curves can have different shapes. The two main
types are linear and non-linear curves. The human eye doesn't
perceive linearly increasing/decreasing brightness as linear (see
also 88ba95bedb79 "backlight: pwm_bl: Compute brightness of LED
linearly to human eye"), hence many backlights use non-linear (often
logarithmic) brightness curves. The type of curve currently is opaque
to userspace, so userspace often uses more or less reliable heuristics
(like the number of brightness levels) to decide whether to treat a
backlight device as linear or non-linear.

Export the type of the brightness curve via the new sysfs attribute
'scale'. The value of the attribute can be 'linear', 'non-linear' or
'unknown'. For devices that don't provide information about the scale
of their brightness curve the value of the 'scale' attribute is 'unknown'.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>

I wonder what kind of problem you are solving here. Can you describe
that in a few words?

The human eye perceives brightness in a logarithmic manner. For
backlights with a linear brightness curve brightness controls like
sliders need to use a mapping to achieve a behavior that is perceived
as linear-ish (more details: http://www.pathwaylighting.com/products/downloads/brochure/technical_materials_1466797044_Linear+vs+Logarithmic+Dimming+White+Paper.pdf)

As of now userspace doesn't have information about the type of the
brightness curve, and often uses heuristics to make a guess, which may
be right most of the time, but not always. The new attribute eliminates
the need to guess.

This is about backlights right? So the kernel provides to userspace an
interval [0, x] for some x and depending on the physics of the the
backlight configuring x/2 (probably?) either means 50% measured light or
50% perceived light, right?

I wonder if it would be possible instead of giving different backlight
implementations the freedom to use either linear or logarithmic (or
quadratic?) scaling and tell userspace which of the options were picked
require the drivers to provide a (say) linear scaling and then userspace
wouldn't need to care about the exact physics.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |