Hi Andrian,

On Sat, Mar 17, 2018 at 07:21:17PM +0900, John Paul Adrian Glaubitz wrote:

quoted

On Mar 17, 2018, at 6:25 PM, jacopo mondi [off-list ref] wrote:

Hi Dmitry,

quoted

On Fri, Mar 16, 2018 at 04:38:00PM -0700, Dmitry Torokhov wrote:
Hi Jacopo,

quoted

On Fri, Mar 16, 2018 at 11:07:48AM +0100, jacopo mondi wrote:
Hello Dmitry

FYI I am brushing the ecovec board these days as well
https://www.spinics.net/lists/linux-sh/msg52536.html

What is the ecovec board BTW? Is it some devkit or what? It seems quite
old to me.

Yes, it is a SuperH 4 based development board. It is old for sure. I'm
also working on removing some stuff the ecovec board file is the only
user of...

Umh, but I’m still using the SH7724 Evovec board. Please don’t remove support for that.

The SuperH port of the Linux kernel is still maintained.

Sorry if I was not clear here, it is not anyone's intention to remove any
support for any SH board. The media subsystem is working to replace
some components (the legacy camera drivers) a few SH boards (ecovec
included) are the only remaining user of. Nobody is working to remove
support for those boards.

I have access to a few SH boards, if you're planning to collect that
informations in some wiki, I'll list myself there.

Thanks
   j

Adrian

quoted

quoted

quoted

And I have a board to test with but without any display panel, I'm
afraid.

quoted

On Thu, Mar 15, 2018 at 03:42:00PM -0700, Dmitry Torokhov wrote:
Commit fe79f919f47e ("sh: ecovec24: Use gpio-backlight") removed custom
backlight support and switched over to generic gpio-backlight driver. The
comment when we run with DVI states "no backlight", but setting
gpio_backlight_data.fbdev to NULL actually makes gpio-backlight to react to
events from any framebuffer device, not ignore them.

We want to get rid of platform data in favor of generic device properties
in gpio_backlight driver, so we can not have kernel pointers passed around
to tie the framebuffer device to backlight. Assuming that the intent of the
above referenced commit was to indeed not export backlight when using DVI,
let's switch to conditionally registering backlight device so it is not
present at all in DVI case.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
arch/sh/boards/mach-ecovec24/setup.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 6f929abe0b50f..67633d2d42390 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c

@@ -368,7 +368,6 @@ static struct platform_device lcdc_device = {

};

static struct gpio_backlight_platform_data gpio_backlight_data = {
-    .fbdev = &lcdc_device.dev,
   .gpio = GPIO_PTR1,
   .def_value = 1,
   .name = "backlight",

@@ -987,7 +986,6 @@ static struct platform_device *ecovec_devices[] __initdata = {
   &usb1_common_device,
   &usbhs_device,
   &lcdc_device,
-    &gpio_backlight_device,
   &ceu0_device,
   &ceu1_device,
   &keysc_device,

@@ -1077,6 +1075,8 @@ static int __init arch_setup(void)

{
   struct clk *clk;
   bool cn12_enabled = false;
+    bool use_backlight = false;
+    int error;

   /* register board specific self-refresh code */
   sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |

@@ -1193,9 +1193,6 @@ static int __init arch_setup(void)
       lcdc_info.ch[0].lcd_modes        = ecovec_dvi_modes;
       lcdc_info.ch[0].num_modes        = ARRAY_SIZE(ecovec_dvi_modes);

-        /* No backlight */
-        gpio_backlight_data.fbdev = NULL;
-
       gpio_set_value(GPIO_PTA2, 1);
       gpio_set_value(GPIO_PTU1, 1);
   } else {

@@ -1217,6 +1214,8 @@ static int __init arch_setup(void)
       /* enable TouchScreen */
       i2c_register_board_info(0, &ts_i2c_clients, 1);
       irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
+
+        use_backlight = true;
   }

   /* enable CEU0 */

@@ -1431,8 +1430,19 @@ static int __init arch_setup(void)
   gpio_set_value(GPIO_PTG4, 1);

#endif

-    return platform_add_devices(ecovec_devices,
-                    ARRAY_SIZE(ecovec_devices));
+    error = platform_add_devices(ecovec_devices,
+                      ARRAY_SIZE(ecovec_devices));

I would invert this.
Register the backlight first, then all other devices.

We could do that, but why would that be better?

That if backlight device registration fails we do not register all
other devices. But yes that may be a bit too harsh, isn't it?

quoted

quoted

quoted

+    if (error)
+        return error;
+
+    if (use_backlight) {
+        error = platform_device_add(&gpio_backlight_device);
+        if (error)
+            pr_warn("%s: failed to register backlight: %d\n",
+                error);

Could you use dev_warn here? Also the format is wrong, I assume you

I would rather not, as the backlight device would be in unknown state
here, and using dev_warn with device that has not been fully registered
does not give any benefits. There is also no ambiguity as there is only
one backlight.

You are very correct, sorry for the fuss.

quoted

quoted

are missing a '__func__' as second function argument.

I'll fix this.

quoted

Also, you may want to return error.

How would caller handle this error? Should we kill all successfully
registered devices on error adding backlight?

As the function returned an error code for 'platform_add_devices()' I
thought we may want to return one as well. That's why I proposed to
invert the registration order :)

All minor nits btw,  sorry for jumping up, I understand this is an
RFC and ecovec board file is not the real juice of this series ;)

Ping me if I can help with testing as I've the board.

Thanks
  j

quoted

Thanks.

--
Dmitry

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html