FAO Thierry,

oh, devicetree mailing list is not added, sorry, so cc'ing ...

2018-02-19 12:11 GMT+01:00 Daniel Thompson [off-list ref]:

quoted

On Fri, Feb 16, 2018 at 06:40:31PM +0100, Enric Balletbo i Serra wrote:

quoted

Hardware needs a delay between setting an initial (non-zero) PWM and
enabling the backlight using GPIO. The post-pwm-on-delay-ms specifies
this delay in milli seconds. Hardware also needs a delay between disabing
the backlight using GPIO and setting PWM value to 0. The pwm-off-delay-ms
is this delay in milli seconds.

Signed-off-by: Enric Balletbo i Serra <redacted>
Acked-by: Pavel Machek <redacted>

Acked-by: Daniel Thompson <redacted>

Lee, I guess that after Daniel ack the only ack missing here is one
from Rob Herring?

I'd also like an ACK from the PWM Maintainer if possible.

Rob, if you have a chance to look at this I'd appreciate.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog