arch-removal: device drivers

@@ -27,16 +27,6 @@ config LOGO_LINUX_CLUT224
 	bool "Standard 224-color Linux logo"
 	default y
 
-config LOGO_BLACKFIN_VGA16
-	bool "16-colour Blackfin Processor Linux logo"
-	depends on BLACKFIN
-	default y
-
-config LOGO_BLACKFIN_CLUT224
-	bool "224-colour Blackfin Processor Linux logo"
-	depends on BLACKFIN
-	default y
-
 config LOGO_DEC_CLUT224
 	bool "224-color Digital Equipment Corporation Linux logo"
 	depends on MACH_DECSTATION || ALPHA

@@ -77,9 +67,4 @@ config LOGO_SUPERH_CLUT224
 	depends on SUPERH
 	default y
 
-config LOGO_M32R_CLUT224
-	bool "224-color M32R Linux logo"
-	depends on M32R
-	default y
-
 endif # LOGO

@@ -5,8 +5,6 @@ obj-$(CONFIG_LOGO)			+= logo.o
 obj-$(CONFIG_LOGO_LINUX_MONO)		+= logo_linux_mono.o
 obj-$(CONFIG_LOGO_LINUX_VGA16)		+= logo_linux_vga16.o
 obj-$(CONFIG_LOGO_LINUX_CLUT224)	+= logo_linux_clut224.o
-obj-$(CONFIG_LOGO_BLACKFIN_CLUT224)	+= logo_blackfin_clut224.o
-obj-$(CONFIG_LOGO_BLACKFIN_VGA16)	+= logo_blackfin_vga16.o
 obj-$(CONFIG_LOGO_DEC_CLUT224)		+= logo_dec_clut224.o
 obj-$(CONFIG_LOGO_MAC_CLUT224)		+= logo_mac_clut224.o
 obj-$(CONFIG_LOGO_PARISC_CLUT224)	+= logo_parisc_clut224.o

@@ -15,7 +13,6 @@ obj-$(CONFIG_LOGO_SUN_CLUT224)		+= logo_sun_clut224.o
 obj-$(CONFIG_LOGO_SUPERH_MONO)		+= logo_superh_mono.o
 obj-$(CONFIG_LOGO_SUPERH_VGA16)		+= logo_superh_vga16.o
 obj-$(CONFIG_LOGO_SUPERH_CLUT224)	+= logo_superh_clut224.o
-obj-$(CONFIG_LOGO_M32R_CLUT224)		+= logo_m32r_clut224.o
 
 obj-$(CONFIG_SPU_BASE)			+= logo_spe_clut224.o
 

@@ -63,10 +63,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
 		/* Generic Linux logo */
 		logo = &logo_linux_vga16;
 #endif
-#ifdef CONFIG_LOGO_BLACKFIN_VGA16
-		/* Blackfin processor logo */
-		logo = &logo_blackfin_vga16;
-#endif
 #ifdef CONFIG_LOGO_SUPERH_VGA16
 		/* SuperH Linux logo */
 		logo = &logo_superh_vga16;

@@ -78,10 +74,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
 		/* Generic Linux logo */
 		logo = &logo_linux_clut224;
 #endif
-#ifdef CONFIG_LOGO_BLACKFIN_CLUT224
-		/* Blackfin Linux logo */
-		logo = &logo_blackfin_clut224;
-#endif
 #ifdef CONFIG_LOGO_DEC_CLUT224
 		/* DEC Linux logo on MIPS/MIPS64 or ALPHA */
 		logo = &logo_dec_clut224;

@@ -107,10 +99,6 @@ const struct linux_logo * __ref fb_find_logo(int depth)
 		/* SuperH Linux logo */
 		logo = &logo_superh_clut224;
 #endif
-#ifdef CONFIG_LOGO_M32R_CLUT224
-		/* M32R Linux logo */
-		logo = &logo_m32r_clut224;
-#endif
 	}
 	return logo;
 }

@@ -36,8 +36,6 @@ struct linux_logo {
 extern const struct linux_logo logo_linux_mono;
 extern const struct linux_logo logo_linux_vga16;
 extern const struct linux_logo logo_linux_clut224;
-extern const struct linux_logo logo_blackfin_vga16;
-extern const struct linux_logo logo_blackfin_clut224;
 extern const struct linux_logo logo_dec_clut224;
 extern const struct linux_logo logo_mac_clut224;
 extern const struct linux_logo logo_parisc_clut224;

@@ -46,7 +44,6 @@ extern const struct linux_logo logo_sun_clut224;
 extern const struct linux_logo logo_superh_mono;
 extern const struct linux_logo logo_superh_vga16;
 extern const struct linux_logo logo_superh_clut224;
-extern const struct linux_logo logo_m32r_clut224;
 extern const struct linux_logo logo_spe_clut224;
 
 extern const struct linux_logo *fb_find_logo(int depth);

@@ -580,109 +580,6 @@ config FB_VGA16
 	  To compile this driver as a module, choose M here: the
 	  module will be called vga16fb.
 
-config FB_BF54X_LQ043
-	tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
-	depends on FB && (BF54x) && !BF542
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
-
-config FB_BFIN_T350MCQB
-	tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
-	depends on FB && BLACKFIN
-	select BFIN_GPTIMERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
-	 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
-	 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-config FB_BFIN_LQ035Q1
-	tristate "SHARP LQ035Q1DH02 TFT LCD"
-	depends on FB && BLACKFIN && SPI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BFIN_GPTIMERS
-	help
-	  This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
-	  the Blackfin Landscape LCD EZ-Extender Card.
-	  This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
-	  It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin-lq035q1-fb.
-
-config FB_BF537_LQ035
-	tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
-	depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BFIN_GPTIMERS
-	help
-	  This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
-	  attached to a BF537.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bf537-lq035.
-
-config FB_BFIN_7393
-	tristate "Blackfin ADV7393 Video encoder"
-	depends on FB && BLACKFIN
-	select I2C
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for a ADV7393 video encoder
-	  attached to a Blackfin on the PPI port.
-	  If your Blackfin board has a ADV7393 select Y.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_adv7393fb.
-
-choice
-	prompt  "Video mode support"
-	depends on FB_BFIN_7393
-	default NTSC
-
-config NTSC
-	bool 'NTSC 720x480'
-
-config PAL
-	bool 'PAL 720x576'
-
-config NTSC_640x480
-	bool 'NTSC 640x480 (Experimental)'
-
-config PAL_640x480
-	bool 'PAL 640x480 (Experimental)'
-
-config NTSC_YCBCR
-	bool 'NTSC 720x480 YCbCR input'
-
-config PAL_YCBCR
-	bool 'PAL 720x576 YCbCR input'
-
-endchoice
-
-choice
-	prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
-	depends on (FB_BFIN_7393)
-	default ADV7393_1XMEM
-
-config ADV7393_1XMEM
-	bool 'Single'
-
-config ADV7393_2XMEM
-	bool 'Double'
-endchoice
-
 config FB_STI
 	tristate "HP STI frame buffer device support"
 	depends on FB && PARISC

@@ -136,11 +136,6 @@ obj-$(CONFIG_FB_VESA)             += vesafb.o
 obj-$(CONFIG_FB_EFI)              += efifb.o
 obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
-obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
-obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
-obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
-obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
 obj-$(CONFIG_FB_MX3)		  += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 obj-$(CONFIG_FB_MXS)		  += mxsfb.o

@@ -96,18 +96,12 @@ static const struct fb_fix_screeninfo s1d13xxxfb_fix = {
 static inline u8
 s1d13xxxfb_readreg(struct s1d13xxxfb_par *par, u16 regno)
 {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
-	regno=((regno & 1) ? (regno & ~1L) : (regno + 1));
-#endif
 	return readb(par->regs + regno);
 }
 
 static inline void
 s1d13xxxfb_writereg(struct s1d13xxxfb_par *par, u16 regno, u8 value)
 {
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
-	regno=((regno & 1) ? (regno & ~1L) : (regno + 1));
-#endif
 	writeb(value, par->regs + regno);
 }
 

@@ -296,11 +290,7 @@ s1d13xxxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 			dbg("s1d13xxxfb_setcolreg: pseudo %d, val %08x\n",
 				    regno, pseudo_val);
 
-#if defined(CONFIG_PLAT_MAPPI)
-			((u32 *)info->pseudo_palette)[regno] = cpu_to_le16(pseudo_val);
-#else
 			((u32 *)info->pseudo_palette)[regno] = pseudo_val;
-#endif
 
 			break;
 		case FB_VISUAL_PSEUDOCOLOR: