[PATCH v3 09/10] pwm: add documentation for pwm push-pull mode
From: Claudiu Beznea <hidden>
Date: 2018-02-22 12:04:11
Also in:
dri-devel, intel-gfx, linux-arm-kernel, linux-clk, linux-devicetree, linux-hwmon, linux-input, linux-leds, linux-media, linux-pwm, linux-samsung-soc, lkml
Subsystem:
documentation, open firmware and flattened device tree bindings, pwm subsystem, the rest · Maintainers:
Jonathan Corbet, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Uwe Kleine-König, Linus Torvalds
Add documentation for PWM push-pull mode. Signed-off-by: Claudiu Beznea <redacted> Reviewed-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/pwm/pwm.txt | 2 ++ Documentation/pwm.txt | 16 ++++++++++++++++ include/dt-bindings/pwm/pwm.h | 1 + 3 files changed, 19 insertions(+)
diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt
index c2b4b9ba0e3f..968dd786ad7c 100644
--- a/Documentation/devicetree/bindings/pwm/pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm.txt@@ -49,6 +49,8 @@ Optionally, the pwm-specifier can encode a number of flags (defined in - PWM_DTMODE_COMPLEMENTARY: PWM complementary working mode (for PWM channels two outputs); if not specified, the default for PWM channel will be used +- PWM_DTMODE_PUSH_PULL: PWM push-pull working modes (for PWM channels with +two outputs); if not specified the default for PWM channel will be used Example with optional PWM specifier for inverse polarity and complementary mode:
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt
index 59592f8cc381..174c371583b6 100644
--- a/Documentation/pwm.txt
+++ b/Documentation/pwm.txt@@ -128,6 +128,22 @@ channel that was exported. The following properties will then be available: PWML1 |__| |__| |__| |__| <--T--> + Push-pull mode - for PWM channels with two outputs; output waveforms + for a PWM channel with 2 outputs, in push-pull mode, with normal + polarity looks like this: + __ __ + PWMH __| |________| |________ + __ __ + PWML ________| |________| |__ + <--T--> + + If polarity is inversed: + __ ________ ________ + PWMH |__| |__| + ________ ________ __ + PWML |__| |__| + <--T--> + Where T is the signal period. Implementing a PWM driver
diff --git a/include/dt-bindings/pwm/pwm.h b/include/dt-bindings/pwm/pwm.h
index b4d61269aced..674dfdd59595 100644
--- a/include/dt-bindings/pwm/pwm.h
+++ b/include/dt-bindings/pwm/pwm.h@@ -12,5 +12,6 @@ #define PWM_POLARITY_INVERTED (1 << 0) #define PWM_DTMODE_COMPLEMENTARY (1 << 1) +#define PWM_DTMODE_PUSH_PULL (1 << 2) #endif
--
2.7.4