RE: [PATCH v10 3/3] backlight arcxcnn add support for ArcticSand devices

quoted

backlight: Add support for Arctic Sand LED backlight driver chips

This should be the subject line of the patch.

Out of interest, how are you submitting your patches?

If you're not already, you should be using:

 > `git format-patch ...`
 > `git send-email ...`
  

quoted

This driver provides support for the Arctic Sand arc2c0608 chip, 
    and provides a framework to support future devices.

'\n' here.

quoted

Reviewed-by: Daniel Thompson <redacted>
Signed-off-by: Olimpiu Dejeu <redacted>

Biggest point however is that this patch is already in Mainline.

The only reason for this set of patches is based on the request from Rob Herring for vendor name change from 'arc' to 'arctic'. Not sure how to proceed, please advise.
 

quoted

---
v9 => v10:
- Per Rob Herring's request changed vendor-prefix to arctic
v8 => v9:
- Addressing kbuild test robot WARNING: PTR_ERR_OR_ZERO can be used
v7 => v8:
- Version updated to match other patch in set. No other changes.
v6 => v7:
- Addressing issues brought up by Daniel Thompson
v5 => v6:
- Addressing issues brought up by Daniel Thompson
v4 => v5:
- Code style changes per Joe Perches and Jingoo Han
v3 => v4:
- Code style changes per Joe Perches and Jingoo Han
v2 => v3:
- Renamed variables to comply with conventions on naming
- Corrected device name in arcxcnn.h
v1 => v2:
- Removed "magic numbers" to initialize registers
- Cleaned up device tree bindings
- Fixed code style to address comments and pass "checkpatch"
- Removed unneeded debug and testing code


 drivers/video/backlight/Kconfig      |   7 +
 drivers/video/backlight/Makefile     |   1 +
 drivers/video/backlight/arcxcnn_bl.c | 419 
+++++++++++++++++++++++++++++++++++
 3 files changed, 427 insertions(+)
 create mode 100644 drivers/video/backlight/arcxcnn_bl.c