[PATCH 00/12] OMAPDSS: use DSI PLL clk for DPI

Hi,

The aim of this series is to enable using DSI PLL as the pixel clock source for
DPI output. There are the following main parts:

* first 4 patches are slightly related generic improvements/fixes
* fix DSI PLL problem related to non-50% duty cycle
* fix DSI PLL problem related to powering
* changes to the clock handling to always use DSI PLL for DPI when possible

I've tested the series on OMAP4 Panda, OMAP4 SDP and OMAP3 Beagle.

 Tomi

Tomi Valkeinen (12):
  OMAPFB: remove use of extended edid block
  OMAPFB: improve mode selection from EDID
  OMAPDSS: fix DPI & DSI init order
  OMAPDSS: fix DSI2 PLL clk names
  OMAPDSS: DSI: skip odd dividers when pck >= 100MHz
  OMAPDSS: DSI: workaround for HSDiv problem
  OMAPDSS: add dss_calc_clock_rates() back
  OMAPDSS: setup default dss fck
  OMAPDSS: hide dss_select_dispc_clk_source()
  OMAPDSS: DPI: use dpi.dsidev to see whether to use dsi pll
  OMAPDSS: DPI: verify if DSI PLL is operational
  OMAPDSS: DPI: always use DSI PLL if available

 drivers/video/omap2/dss/core.c           |   12 ++--
 drivers/video/omap2/dss/dpi.c            |   99 +++++++++++++++++++++---------
 drivers/video/omap2/dss/dsi.c            |   14 ++++-
 drivers/video/omap2/dss/dss.c            |   67 +++++++++++++++++++-
 drivers/video/omap2/dss/dss.h            |    2 +-
 drivers/video/omap2/dss/hdmi.c           |    8 ---
 drivers/video/omap2/omapfb/omapfb-main.c |   16 ++---
 7 files changed, 160 insertions(+), 58 deletions(-)

-- 
1.7.10.4