[PATCH 07/12] OMAPDSS: add dss_calc_clock_rates() back
flat view
STALE5089d
From: Tomi Valkeinen <hidden>
Date: 2012-10-30 16:10:04
Also in:
linux-omap
Subsystem:
framebuffer layer, the rest · Maintainers:
Helge Deller, Linus Torvalds
dss_calc_clock_rates() was removed earlier as it was not used, but it is needed for DSI PLL calculations, so this patch adds it back. Signed-off-by: Tomi Valkeinen <redacted> --- drivers/video/omap2/dss/dss.c | 23 +++++++++++++++++++++++ drivers/video/omap2/dss/dss.h | 1 + 2 files changed, 24 insertions(+)
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index a85bd05..5affa86 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c@@ -432,6 +432,29 @@ enum omap_dss_clk_source dss_get_lcd_clk_source(enum omap_channel channel) } } +/* calculate clock rates using dividers in cinfo */ +int dss_calc_clock_rates(struct dss_clock_info *cinfo) +{ + if (dss.dpll4_m4_ck) { + unsigned long prate; + + if (cinfo->fck_div > dss.feat->fck_div_max || + cinfo->fck_div = 0) + return -EINVAL; + + prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck)); + + cinfo->fck = prate / cinfo->fck_div * + dss.feat->dss_fck_multiplier; + } else { + if (cinfo->fck_div != 0) + return -EINVAL; + cinfo->fck = clk_get_rate(dss.dss_clk); + } + + return 0; +} + int dss_set_clock_div(struct dss_clock_info *cinfo) { if (dss.dpll4_m4_ck) {
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index fb89165..ae4e618 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h@@ -297,6 +297,7 @@ void dss_set_venc_output(enum omap_dss_venc_type type); void dss_set_dac_pwrdn_bgz(bool enable); unsigned long dss_get_dpll4_rate(void); +int dss_calc_clock_rates(struct dss_clock_info *cinfo); int dss_set_clock_div(struct dss_clock_info *cinfo); int dss_calc_clock_div(unsigned long req_pck, struct dss_clock_info *dss_cinfo, struct dispc_clock_info *dispc_cinfo);
--
1.7.10.4