[PATCH v2 00/34] i.MX multi-platform support

Here is the second post, which should have addressed the comments that
reviewers put on v1.

It's available on branch below.

  git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform-v2

And it's based on the following branches.

  calxeda/multi-plat
  arm-soc/multiplatform/platform-data
  arm-soc/multiplatform/smp_ops
  arm-soc/imx/cleanup
  arm-soc/imx/dt
  sound/for-3.7

Subsystem maintainers,

I plan to send the whole series for 3.7 via arm-soc tree.  Please let
me know if you have problem with that.  Thanks.

Shawn

---

Shawn Guo (34):
  ARM: imx: include board headers in the same folder
  ARM: imx: move iomux drivers and headers into mach-imx
  ARM: imx: remove unnecessary inclusion from device-imx*.h
  ARM: imx: move platform device code into mach-imx
  ARM: imx: merge plat-mxc into mach-imx
  ARM: imx: include common.h rather than mach/common.h
  ARM: imx: ARM: imx: include cpuidle.h rather than mach/cpuidle.h
  ARM: imx: include iim.h rather than mach/iim.h
  ARM: imx: include iram.h rather than mach/iram.h
  ARM: imx: include ulpi.h rather than mach/ulpi.h
  media: mx1_camera: remove the driver
  ARM: imx: remove mach/dma-mx1-mx2.h
  dma: ipu: rename mach/ipu.h to include/linux/dma/ipu-dma.h
  dma: imx-sdma: remove unneeded mach/hardware.h inclusion
  ASoC: imx-ssi: remove unneeded mach/hardware.h inclusion
  usb: ehci-mxc: remove unneeded mach/hardware.h inclusion
  video: mx3fb: remove unneeded mach/hardware.h inclusion
  watchdog: imx2_wdt: remove unneeded mach/hardware.h inclusion
  i2c: imx: remove cpu_is_xxx by using platform_device_id
  mtd: mxc_nand: remove cpu_is_xxx by using platform_device_id
  rtc: mxc_rtc: remove cpu_is_xxx by using platform_device_id
  dma: imx-dma: use devm_kzalloc and devm_request_irq
  dma: imx-dma: retrieve MEM and IRQ from resources
  dma: imx-dma: remove cpu_is_xxx by using platform_device_id
  media: mx2_camera: remove dead code in mx2_camera_add_device
  media: mx2_camera: use managed functions to clean up code
  media: mx2_camera: remove cpu_is_xxx by using platform_device_id
  mmc: mxcmmc: remove cpu_is_xxx by using platform_device_id
  video: imxfb: remove cpu_is_xxx by using platform_device_id
  ARM: imx: move debug macros to include/debug
  ARM: imx: include hardware.h rather than mach/hardware.h
  ARM: imx: remove header file mach/irqs.h
  ARM: imx: call mxc_device_init() in soc specific function
  ARM: imx: enable multi-platform build

 .../devicetree/bindings/i2c/fsl-imx-i2c.txt        |    4 +-
 MAINTAINERS                                        |    1 -
 arch/arm/Kconfig                                   |   15 +-
 arch/arm/Kconfig.debug                             |    8 +
 arch/arm/Makefile                                  |    1 -
 arch/arm/boot/dts/imx27.dtsi                       |    4 +-
 arch/arm/boot/dts/imx51.dtsi                       |    4 +-
 arch/arm/boot/dts/imx53.dtsi                       |    6 +-
 arch/arm/boot/dts/imx6q.dtsi                       |    6 +-
 arch/arm/configs/imx_v4_v5_defconfig               |    5 +-
 arch/arm/configs/imx_v6_v7_defconfig               |    3 +-
 .../mach/debug-macro.S => include/debug/imx.S}     |   33 +-
 arch/arm/{plat-mxc => mach-imx}/3ds_debugboard.c   |    2 +-
 .../include/mach => mach-imx}/3ds_debugboard.h     |    0
 arch/arm/mach-imx/Kconfig                          |   89 +-
 arch/arm/mach-imx/Makefile                         |   23 +-
 arch/arm/{plat-mxc => mach-imx}/avic.c             |    5 +-
 .../include/mach => mach-imx}/board-mx31lilly.h    |    0
 .../include/mach => mach-imx}/board-mx31lite.h     |    0
 .../include/mach => mach-imx}/board-mx31moboard.h  |    0
 .../include/mach => mach-imx}/board-pcm038.h       |    0
 arch/arm/mach-imx/clk-imx1.c                       |   18 +-
 arch/arm/mach-imx/clk-imx21.c                      |   18 +-
 arch/arm/mach-imx/clk-imx25.c                      |   26 +-
 arch/arm/mach-imx/clk-imx27.c                      |   40 +-
 arch/arm/mach-imx/clk-imx31.c                      |   21 +-
 arch/arm/mach-imx/clk-imx35.c                      |   13 +-
 arch/arm/mach-imx/clk-imx51-imx53.c                |   15 +-
 arch/arm/mach-imx/clk-imx6q.c                      |    3 +-
 arch/arm/mach-imx/clk-pllv1.c                      |    4 +-
 .../{plat-mxc/include/mach => mach-imx}/common.h   |    1 +
 arch/arm/mach-imx/cpu-imx25.c                      |    5 +-
 arch/arm/mach-imx/cpu-imx27.c                      |    2 +-
 arch/arm/mach-imx/cpu-imx31.c                      |    7 +-
 arch/arm/mach-imx/cpu-imx35.c                      |    5 +-
 arch/arm/mach-imx/cpu-imx5.c                       |    3 +-
 arch/arm/{plat-mxc => mach-imx}/cpu.c              |    3 +-
 arch/arm/mach-imx/cpu_op-mx51.c                    |    3 +-
 arch/arm/{plat-mxc => mach-imx}/cpufreq.c          |    3 +-
 arch/arm/{plat-mxc => mach-imx}/cpuidle.c          |    0
 .../{plat-mxc/include/mach => mach-imx}/cpuidle.h  |    0
 arch/arm/mach-imx/devices-imx1.h                   |    3 +-
 arch/arm/mach-imx/devices-imx21.h                  |    3 +-
 arch/arm/mach-imx/devices-imx25.h                  |    3 +-
 arch/arm/mach-imx/devices-imx27.h                  |    3 +-
 arch/arm/mach-imx/devices-imx31.h                  |    3 +-
 arch/arm/mach-imx/devices-imx35.h                  |    3 +-
 arch/arm/mach-imx/devices-imx50.h                  |    3 +-
 arch/arm/mach-imx/devices-imx51.h                  |    3 +-
 arch/arm/{plat-mxc => mach-imx}/devices/Kconfig    |    3 -
 arch/arm/{plat-mxc => mach-imx}/devices/Makefile   |    3 +-
 .../mach => mach-imx/devices}/devices-common.h     |   19 +-
 arch/arm/{plat-mxc => mach-imx/devices}/devices.c  |    4 +-
 .../devices/platform-ahci-imx.c                    |    5 +-
 .../{plat-mxc => mach-imx}/devices/platform-fec.c  |    5 +-
 .../devices/platform-flexcan.c                     |    4 +-
 .../devices/platform-fsl-usb2-udc.c                |    5 +-
 .../devices/platform-gpio-mxc.c                    |    2 +-
 .../devices/platform-gpio_keys.c                   |    5 +-
 .../devices/platform-imx-dma.c                     |   23 +-
 .../devices/platform-imx-fb.c                      |   16 +-
 .../devices/platform-imx-i2c.c                     |   32 +-
 .../devices/platform-imx-keypad.c                  |    4 +-
 .../devices/platform-imx-ssi.c                     |    4 +-
 .../devices/platform-imx-uart.c                    |    4 +-
 .../devices/platform-imx2-wdt.c                    |    5 +-
 .../devices/platform-imx21-hcd.c                   |    4 +-
 .../devices/platform-imx_udc.c                     |    4 +-
 .../devices/platform-imxdi_rtc.c                   |    5 +-
 .../devices/platform-ipu-core.c                    |    5 +-
 .../devices/platform-mx2-camera.c                  |   16 +-
 .../devices/platform-mxc-ehci.c                    |    5 +-
 .../devices/platform-mxc-mmc.c                     |   20 +-
 .../devices/platform-mxc_nand.c                    |   25 +-
 .../devices/platform-mxc_pwm.c                     |    4 +-
 .../devices/platform-mxc_rnga.c                    |    4 +-
 .../devices/platform-mxc_rtc.c                     |   13 +-
 .../devices/platform-mxc_w1.c                      |    4 +-
 .../devices/platform-pata_imx.c                    |    4 +-
 .../devices/platform-sdhci-esdhc-imx.c             |    5 +-
 .../devices/platform-spi_imx.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx25.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx27.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx31.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx35.c                     |    4 +-
 arch/arm/mach-imx/ehci-imx5.c                      |    4 +-
 arch/arm/{plat-mxc => mach-imx}/epit.c             |    6 +-
 .../include/mach => mach-imx}/eukrea-baseboards.h  |    0
 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c       |    7 +-
 arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c     |    8 +-
 arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c     |    7 +-
 arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c     |    7 +-
 .../{plat-mxc/include/mach => mach-imx}/hardware.h |   26 +-
 arch/arm/mach-imx/hotplug.c                        |    3 +-
 arch/arm/{plat-mxc/include/mach => mach-imx}/iim.h |    0
 arch/arm/mach-imx/imx27-dt.c                       |   11 +-
 arch/arm/mach-imx/imx31-dt.c                       |    5 +-
 arch/arm/mach-imx/imx51-dt.c                       |    9 +-
 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h       |   10 -
 arch/arm/mach-imx/iomux-imx31.c                    |    5 +-
 .../include/mach => mach-imx}/iomux-mx1.h          |    2 +-
 .../include/mach => mach-imx}/iomux-mx21.h         |    4 +-
 .../include/mach => mach-imx}/iomux-mx25.h         |    2 +-
 .../include/mach => mach-imx}/iomux-mx27.h         |    4 +-
 .../include/mach => mach-imx}/iomux-mx2x.h         |    0
 .../include/mach => mach-imx}/iomux-mx3.h          |    0
 .../include/mach => mach-imx}/iomux-mx35.h         |    2 +-
 .../include/mach => mach-imx}/iomux-mx50.h         |    2 +-
 .../include/mach => mach-imx}/iomux-mx51.h         |    2 +-
 arch/arm/{plat-mxc => mach-imx}/iomux-v1.c         |    5 +-
 .../{plat-mxc/include/mach => mach-imx}/iomux-v1.h |    0
 arch/arm/{plat-mxc => mach-imx}/iomux-v3.c         |    5 +-
 .../{plat-mxc/include/mach => mach-imx}/iomux-v3.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/iram.h |    0
 arch/arm/{plat-mxc => mach-imx}/iram_alloc.c       |    3 +-
 arch/arm/{plat-mxc => mach-imx}/irq-common.c       |    0
 arch/arm/{plat-mxc => mach-imx}/irq-common.h       |    3 +
 arch/arm/mach-imx/lluart.c                         |    3 +-
 arch/arm/mach-imx/mach-apf9328.c                   |    7 +-
 arch/arm/mach-imx/mach-armadillo5x0.c              |    9 +-
 arch/arm/mach-imx/mach-bug.c                       |    7 +-
 arch/arm/mach-imx/mach-cpuimx27.c                  |   11 +-
 arch/arm/mach-imx/mach-cpuimx35.c                  |    9 +-
 arch/arm/mach-imx/mach-cpuimx51sd.c                |    9 +-
 arch/arm/mach-imx/mach-eukrea_cpuimx25.c           |   10 +-
 arch/arm/mach-imx/mach-imx27_visstrim_m10.c        |    6 +-
 arch/arm/mach-imx/mach-imx27ipcam.c                |    6 +-
 arch/arm/mach-imx/mach-imx27lite.c                 |    6 +-
 arch/arm/mach-imx/mach-imx53.c                     |   11 +-
 arch/arm/mach-imx/mach-imx6q.c                     |    6 +-
 arch/arm/mach-imx/mach-kzm_arm11_01.c              |    7 +-
 arch/arm/mach-imx/mach-mx1ads.c                    |    7 +-
 arch/arm/mach-imx/mach-mx21ads.c                   |    6 +-
 arch/arm/mach-imx/mach-mx25_3ds.c                  |    8 +-
 arch/arm/mach-imx/mach-mx27_3ds.c                  |   10 +-
 arch/arm/mach-imx/mach-mx27ads.c                   |    6 +-
 arch/arm/mach-imx/mach-mx31_3ds.c                  |   12 +-
 arch/arm/mach-imx/mach-mx31ads.c                   |    5 +-
 arch/arm/mach-imx/mach-mx31lilly.c                 |   11 +-
 arch/arm/mach-imx/mach-mx31lite.c                  |   11 +-
 arch/arm/mach-imx/mach-mx31moboard.c               |   14 +-
 arch/arm/mach-imx/mach-mx35_3ds.c                  |    8 +-
 arch/arm/mach-imx/mach-mx50_rdp.c                  |    7 +-
 arch/arm/mach-imx/mach-mx51_3ds.c                  |    9 +-
 arch/arm/mach-imx/mach-mx51_babbage.c              |    7 +-
 arch/arm/mach-imx/mach-mxt_td60.c                  |    6 +-
 arch/arm/mach-imx/mach-pca100.c                    |    8 +-
 arch/arm/mach-imx/mach-pcm037.c                    |    8 +-
 arch/arm/mach-imx/mach-pcm037_eet.c                |    5 +-
 arch/arm/mach-imx/mach-pcm038.c                    |   13 +-
 arch/arm/mach-imx/mach-pcm043.c                    |    9 +-
 arch/arm/mach-imx/mach-qong.c                      |    6 +-
 arch/arm/mach-imx/mach-scb9328.c                   |    7 +-
 arch/arm/mach-imx/mach-vpr200.c                    |    7 +-
 arch/arm/mach-imx/mm-imx1.c                        |    9 +-
 arch/arm/mach-imx/mm-imx21.c                       |   14 +-
 arch/arm/mach-imx/mm-imx25.c                       |   12 +-
 arch/arm/mach-imx/mm-imx27.c                       |   14 +-
 arch/arm/mach-imx/mm-imx3.c                        |   13 +-
 arch/arm/mach-imx/mm-imx5.c                        |   12 +-
 arch/arm/mach-imx/mx1-camera-fiq-ksym.c            |   18 -
 arch/arm/mach-imx/mx1-camera-fiq.S                 |   35 -
 arch/arm/{plat-mxc/include/mach => mach-imx}/mx1.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx21.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx25.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx27.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx2x.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx31.h |    0
 arch/arm/mach-imx/mx31lilly-db.c                   |    9 +-
 arch/arm/mach-imx/mx31lite-db.c                    |    9 +-
 arch/arm/mach-imx/mx31moboard-devboard.c           |    9 +-
 arch/arm/mach-imx/mx31moboard-marxbot.c            |    9 +-
 arch/arm/mach-imx/mx31moboard-smartbot.c           |   11 +-
 .../arm/{plat-mxc/include/mach => mach-imx}/mx35.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx3x.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx50.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx51.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx53.h |    0
 .../arm/{plat-mxc/include/mach => mach-imx}/mx6q.h |    0
 arch/arm/{plat-mxc/include/mach => mach-imx}/mxc.h |    0
 arch/arm/mach-imx/pcm970-baseboard.c               |    7 +-
 arch/arm/mach-imx/platsmp.c                        |    5 +-
 arch/arm/mach-imx/pm-imx27.c                       |    3 +-
 arch/arm/mach-imx/pm-imx3.c                        |    7 +-
 arch/arm/mach-imx/pm-imx5.c                        |    7 +-
 arch/arm/mach-imx/pm-imx6q.c                       |    5 +-
 arch/arm/{plat-mxc => mach-imx}/ssi-fiq-ksym.c     |    0
 arch/arm/{plat-mxc => mach-imx}/ssi-fiq.S          |    0
 arch/arm/{plat-mxc => mach-imx}/system.c           |    5 +-
 arch/arm/{plat-mxc => mach-imx}/time.c             |    5 +-
 arch/arm/{plat-mxc => mach-imx}/tzic.c             |    6 +-
 arch/arm/{plat-mxc => mach-imx}/ulpi.c             |    2 +-
 .../arm/{plat-mxc/include/mach => mach-imx}/ulpi.h |    0
 arch/arm/plat-mxc/Kconfig                          |   89 --
 arch/arm/plat-mxc/Makefile                         |   24 -
 arch/arm/plat-mxc/devices/platform-mx1-camera.c    |   42 -
 arch/arm/plat-mxc/include/mach/irqs.h              |   21 -
 arch/arm/plat-mxc/include/mach/timex.h             |   22 -
 arch/arm/plat-mxc/include/mach/uncompress.h        |  132 ---
 drivers/dma/imx-dma.c                              |  137 +--
 drivers/dma/imx-sdma.c                             |    1 -
 drivers/dma/ipu/ipu_idmac.c                        |    3 +-
 drivers/dma/ipu/ipu_irq.c                          |    3 +-
 drivers/i2c/busses/i2c-imx.c                       |   40 +-
 drivers/media/video/Kconfig                        |   12 -
 drivers/media/video/Makefile                       |    1 -
 drivers/media/video/mx1_camera.c                   |  889 --------------------
 drivers/media/video/mx2_camera.c                   |  246 +++---
 drivers/media/video/mx3_camera.c                   |    2 +-
 drivers/mmc/host/mxcmmc.c                          |   31 +-
 drivers/mtd/nand/mxc_nand.c                        |   86 +-
 drivers/rtc/rtc-mxc.c                              |   34 +-
 drivers/usb/host/ehci-mxc.c                        |    1 -
 drivers/video/imxfb.c                              |   38 +-
 drivers/video/mx3fb.c                              |    3 +-
 drivers/watchdog/imx2_wdt.c                        |    1 -
 .../mach/ipu.h => include/linux/dma/ipu-dma.h      |    6 +-
 include/linux/platform_data/asoc-imx-ssi.h         |    2 +
 include/linux/platform_data/camera-mx1.h           |   35 -
 include/linux/platform_data/dma-imx.h              |    4 +-
 sound/soc/fsl/imx-pcm-fiq.c                        |    1 -
 sound/soc/fsl/imx-ssi.c                            |    1 -
 222 files changed, 1115 insertions(+), 2161 deletions(-)
 rename arch/arm/{plat-mxc/include/mach/debug-macro.S => include/debug/imx.S} (59%)
 rename arch/arm/{plat-mxc => mach-imx}/3ds_debugboard.c (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/3ds_debugboard.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/avic.c (98%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/board-mx31lilly.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/board-mx31lite.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/board-mx31moboard.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/board-pcm038.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/common.h (99%)
 rename arch/arm/{plat-mxc => mach-imx}/cpu.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/cpufreq.c (99%)
 rename arch/arm/{plat-mxc => mach-imx}/cpuidle.c (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/cpuidle.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/Kconfig (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/Makefile (96%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx/devices}/devices-common.h (96%)
 rename arch/arm/{plat-mxc => mach-imx/devices}/devices.c (92%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-ahci-imx.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-fec.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-flexcan.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-fsl-usb2-udc.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-gpio-mxc.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-gpio_keys.c (94%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-dma.c (63%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-fb.c (79%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-i2c.c (76%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-keypad.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-ssi.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx-uart.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx2-wdt.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx21-hcd.c (94%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imx_udc.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-imxdi_rtc.c (94%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-ipu-core.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mx2-camera.c (83%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc-ehci.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc-mmc.c (76%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_nand.c (74%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_pwm.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_rnga.c (95%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_rtc.c (77%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-mxc_w1.c (95%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-pata_imx.c (96%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-sdhci-esdhc-imx.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/devices/platform-spi_imx.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/epit.c (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/eukrea-baseboards.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/hardware.h (94%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iim.h (100%)
 delete mode 100644 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx1.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx21.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx25.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx27.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx2x.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx3.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx35.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx50.h (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-mx51.h (99%)
 rename arch/arm/{plat-mxc => mach-imx}/iomux-v1.c (98%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-v1.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/iomux-v3.c (97%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iomux-v3.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/iram.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/iram_alloc.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/irq-common.c (100%)
 rename arch/arm/{plat-mxc => mach-imx}/irq-common.h (94%)
 delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c
 delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx1.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx21.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx25.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx27.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx2x.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx31.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx35.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx3x.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx50.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx51.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx53.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mx6q.h (100%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/mxc.h (100%)
 rename arch/arm/{plat-mxc => mach-imx}/ssi-fiq-ksym.c (100%)
 rename arch/arm/{plat-mxc => mach-imx}/ssi-fiq.S (100%)
 rename arch/arm/{plat-mxc => mach-imx}/system.c (97%)
 rename arch/arm/{plat-mxc => mach-imx}/time.c (99%)
 rename arch/arm/{plat-mxc => mach-imx}/tzic.c (98%)
 rename arch/arm/{plat-mxc => mach-imx}/ulpi.c (99%)
 rename arch/arm/{plat-mxc/include/mach => mach-imx}/ulpi.h (100%)
 delete mode 100644 arch/arm/plat-mxc/Kconfig
 delete mode 100644 arch/arm/plat-mxc/Makefile
 delete mode 100644 arch/arm/plat-mxc/devices/platform-mx1-camera.c
 delete mode 100644 arch/arm/plat-mxc/include/mach/irqs.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/timex.h
 delete mode 100644 arch/arm/plat-mxc/include/mach/uncompress.h
 delete mode 100644 drivers/media/video/mx1_camera.c
 rename arch/arm/plat-mxc/include/mach/ipu.h => include/linux/dma/ipu-dma.h (97%)
 delete mode 100644 include/linux/platform_data/camera-mx1.h

-- 
1.7.9.5

The inclusion of mach/hardware.h is not used by the driver at all.
Remove it.

Signed-off-by: Shawn Guo <redacted>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org
---
 drivers/video/mx3fb.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 3b63ad8..fc50320 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c

@@ -29,7 +29,6 @@
 #include <linux/dma/ipu-dma.h>
 
 #include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
 #include <linux/platform_data/video-mx3fb.h>
 
 #include <asm/io.h>

-- 
1.7.9.5

It changes the driver to use platform_device_id rather than cpu_is_xxx
to determine the controller type, and updates the platform code
accordingly.

As the result, mach/hardware.h inclusion gets removed from the driver.

Signed-off-by: Shawn Guo <redacted>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org
---
 arch/arm/mach-imx/clk-imx1.c                |    6 ++---
 arch/arm/mach-imx/clk-imx21.c               |    6 ++---
 arch/arm/mach-imx/clk-imx25.c               |    6 ++---
 arch/arm/mach-imx/clk-imx27.c               |    6 ++---
 arch/arm/mach-imx/devices/devices-common.h  |    1 +
 arch/arm/mach-imx/devices/platform-imx-fb.c |   11 ++++----
 drivers/video/imxfb.c                       |   38 ++++++++++++++++++++++-----
 7 files changed, 51 insertions(+), 23 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index a453e11..3413c41 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c

@@ -101,9 +101,9 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
 	clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
 	clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
-	clk_register_clkdev(clk[per2], "per", "imx-fb.0");
-	clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0");
-	clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
+	clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
+	clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
 	clk_register_clkdev(clk[hclk], "mshc", NULL);
 	clk_register_clkdev(clk[per3], "ssi", NULL);
 	clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0");

diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index 8aec572..fcdaa9b 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c

@@ -157,9 +157,9 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
 	clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
 	clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
-	clk_register_clkdev(clk[per3], "per", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
 	clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
 	clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");

diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index 71fe521..da7155d 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c

@@ -219,9 +219,9 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
 	clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
 	clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
-	clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");

diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 71c3f12..d73d9ed 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c

@@ -221,9 +221,9 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0");
 	clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1");
 	clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2");
-	clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
-	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
+	clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
 	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");

diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 7fa3ef7..c32279b 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h

@@ -100,6 +100,7 @@ struct platform_device *__init imx_add_imxdi_rtc(
 
 #include <linux/platform_data/video-imxfb.h>
 struct imx_imx_fb_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t iosize;
 	resource_size_t irq;

diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 4e6f857..abea28b 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c

@@ -10,8 +10,9 @@
 #include <mach/hardware.h>
 #include "devices-common.h"
 
-#define imx_imx_fb_data_entry_single(soc, _size)			\
+#define imx_imx_fb_data_entry_single(soc, _devid, _size)		\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _LCDC_BASE_ADDR,			\
 		.iosize = _size,					\
 		.irq = soc ## _INT_LCDC,				\

@@ -19,22 +20,22 @@
 
 #ifdef CONFIG_SOC_IMX1
 const struct imx_imx_fb_data imx1_imx_fb_data __initconst -	imx_imx_fb_data_entry_single(MX1, SZ_4K);
+	imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX1 */
 
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_fb_data imx21_imx_fb_data __initconst -	imx_imx_fb_data_entry_single(MX21, SZ_4K);
+	imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_imx_fb_data imx25_imx_fb_data __initconst -	imx_imx_fb_data_entry_single(MX25, SZ_16K);
+	imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_fb_data imx27_imx_fb_data __initconst -	imx_imx_fb_data_entry_single(MX27, SZ_4K);
+	imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
 struct platform_device *__init imx_add_imx_fb(

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 53ffdfc..64a39e7 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c

@@ -33,7 +33,6 @@
 #include <linux/math64.h>
 
 #include <linux/platform_data/video-imxfb.h>
-#include <mach/hardware.h>
 
 /*
  * Complain if VAR is out of range.

@@ -53,8 +52,8 @@
 #define LCDC_SIZE	0x04
 #define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
 
-#define YMAX_MASK       (cpu_is_mx1() ? 0x1ff : 0x3ff)
-#define SIZE_YMAX(y)	((y) & YMAX_MASK)
+#define YMAX_MASK_IMX1	0x1ff
+#define YMAX_MASK_IMX21	0x3ff
 
 #define LCDC_VPW	0x08
 #define VPW_VPW(x)	((x) & 0x3ff)

@@ -128,12 +127,18 @@ struct imxfb_rgb {
 	struct fb_bitfield	transp;
 };
 
+enum imxfb_type {
+	IMX1_FB,
+	IMX21_FB,
+};
+
 struct imxfb_info {
 	struct platform_device  *pdev;
 	void __iomem		*regs;
 	struct clk		*clk_ipg;
 	struct clk		*clk_ahb;
 	struct clk		*clk_per;
+	enum imxfb_type		devtype;
 
 	/*
 	 * These are the addresses we mapped

@@ -168,6 +173,24 @@ struct imxfb_info {
 	void (*backlight_power)(int);
 };
 
+static struct platform_device_id imxfb_devtype[] = {
+	{
+		.name = "imx1-fb",
+		.driver_data = IMX1_FB,
+	}, {
+		.name = "imx21-fb",
+		.driver_data = IMX21_FB,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, imxfb_devtype);
+
+static inline int is_imx1_fb(struct imxfb_info *fbi)
+{
+	return fbi->devtype = IMX1_FB;
+}
+
 #define IMX_NAME	"IMX"
 
 /*

@@ -366,7 +389,7 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		break;
 	case 16:
 	default:
-		if (cpu_is_mx1())
+		if (is_imx1_fb(fbi))
 			pcr |= PCR_BPIX_12;
 		else
 			pcr |= PCR_BPIX_16;

@@ -596,6 +619,7 @@ static struct fb_ops imxfb_ops = {
 static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct imxfb_info *fbi = info->par;
+	u32 ymax_mask = is_imx1_fb(fbi) ? YMAX_MASK_IMX1 : YMAX_MASK_IMX21;
 
 	pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
 		var->xres, var->hsync_len,

@@ -617,7 +641,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 	if (var->right_margin > 255)
 		printk(KERN_ERR "%s: invalid right_margin %d\n",
 			info->fix.id, var->right_margin);
-	if (var->yres < 1 || var->yres > YMAX_MASK)
+	if (var->yres < 1 || var->yres > ymax_mask)
 		printk(KERN_ERR "%s: invalid yres %d\n",
 			info->fix.id, var->yres);
 	if (var->vsync_len > 100)

@@ -645,7 +669,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 		VCR_V_WAIT_2(var->upper_margin),
 		fbi->regs + LCDC_VCR);
 
-	writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
+	writel(SIZE_XMAX(var->xres) | (var->yres & ymax_mask),
 			fbi->regs + LCDC_SIZE);
 
 	writel(fbi->pcr, fbi->regs + LCDC_PCR);

@@ -765,6 +789,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	fbi = info->par;
+	fbi->devtype = pdev->id_entry->driver_data;
 
 	if (!fb_mode)
 		fb_mode = pdata->mode[0].mode.name;

@@ -938,6 +963,7 @@ static struct platform_driver imxfb_driver = {
 	.driver		= {
 		.name	= DRIVER_NAME,
 	},
+	.id_table	= imxfb_devtype,
 };
 
 static int imxfb_setup(void)

-- 
1.7.9.5

The header ipu.h really belongs to dma subsystem rather than imx
platform.  Rename it to ipu-dma.h and put it into include/linux/dma/.

Signed-off-by: Shawn Guo <redacted>
Acked-by: Guennadi Liakhovetski <redacted>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Vinod Koul <redacted>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: linux-media@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
---
 drivers/dma/ipu/ipu_idmac.c                        |    3 +--
 drivers/dma/ipu/ipu_irq.c                          |    3 +--
 drivers/media/video/mx3_camera.c                   |    2 +-
 drivers/video/mx3fb.c                              |    2 +-
 .../mach/ipu.h => include/linux/dma/ipu-dma.h      |    6 +++---
 5 files changed, 7 insertions(+), 9 deletions(-)
 rename arch/arm/mach-imx/include/mach/ipu.h => include/linux/dma/ipu-dma.h (97%)

diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index c7573e5..6585537 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c

@@ -22,8 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
-
-#include <mach/ipu.h>
+#include <linux/dma/ipu-dma.h>
 
 #include "../dmaengine.h"
 #include "ipu_intern.h"

diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
index fa95bcc..a5ee37d 100644
--- a/drivers/dma/ipu/ipu_irq.c
+++ b/drivers/dma/ipu/ipu_irq.c

@@ -15,8 +15,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/module.h>
-
-#include <mach/ipu.h>
+#include <linux/dma/ipu-dma.h>
 
 #include "ipu_intern.h"
 

diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 1481b0d..892cba5 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c

@@ -17,6 +17,7 @@
 #include <linux/vmalloc.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
+#include <linux/dma/ipu-dma.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>

@@ -24,7 +25,6 @@
 #include <media/soc_camera.h>
 #include <media/soc_mediabus.h>
 
-#include <mach/ipu.h>
 #include <linux/platform_data/camera-mx3.h>
 #include <linux/platform_data/dma-imx.h>
 

diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index d738108..3b63ad8 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c

@@ -26,10 +26,10 @@
 #include <linux/console.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
+#include <linux/dma/ipu-dma.h>
 
 #include <linux/platform_data/dma-imx.h>
 #include <mach/hardware.h>
-#include <mach/ipu.h>
 #include <linux/platform_data/video-mx3fb.h>
 
 #include <asm/io.h>

diff --git a/arch/arm/mach-imx/include/mach/ipu.h b/include/linux/dma/ipu-dma.h
similarity index 97%
rename from arch/arm/mach-imx/include/mach/ipu.h
rename to include/linux/dma/ipu-dma.h
index 539e559..1803111 100644
--- a/arch/arm/mach-imx/include/mach/ipu.h
+++ b/include/linux/dma/ipu-dma.h

@@ -9,8 +9,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef _IPU_H_
-#define _IPU_H_
+#ifndef __LINUX_DMA_IPU_DMA_H
+#define __LINUX_DMA_IPU_DMA_H
 
 #include <linux/types.h>
 #include <linux/dmaengine.h>

@@ -174,4 +174,4 @@ struct idmac_channel {
 #define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
 #define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
 
-#endif
+#endif /* __LINUX_DMA_IPU_DMA_H */

-- 
1.7.9.5

On Thursday 20 September 2012, Shawn Guo wrote:

Here is the second post, which should have addressed the comments that
reviewers put on v1.

It's available on branch below.

  git://git.linaro.org/people/shawnguo/linux-2.6.git imx/multi-platform-v2

And it's based on the following branches.

  calxeda/multi-plat
  arm-soc/multiplatform/platform-data
  arm-soc/multiplatform/smp_ops
  arm-soc/imx/cleanup
  arm-soc/imx/dt
  sound/for-3.7

Subsystem maintainers,

I plan to send the whole series for 3.7 via arm-soc tree.  Please let
me know if you have problem with that.  Thanks.

The first five branches are scheduled to go through the arm-soc tree, so
I'm fine with that. For the sound/for-3.7 branch, I'd like to know when
to expect that hitting mainline. If it always gets in very early during the
merge window, it's probably ok to put the imx/multi-platform patches into
the same branch as the other ones in arm-soc and wait for the sound stuff
to hit mainline first, otherwise I'd suggest we start a second
next/multiplatform-2 branch for imx and send the first part early on
but then wait with the second batch before sound gets in.

	Arnd

On Thu, Sep 20, 2012 at 07:39:34AM +0000, Arnd Bergmann wrote:

The first five branches are scheduled to go through the arm-soc tree, so
I'm fine with that. For the sound/for-3.7 branch, I'd like to know when
to expect that hitting mainline. If it always gets in very early during the
merge window, it's probably ok to put the imx/multi-platform patches into
the same branch as the other ones in arm-soc and wait for the sound stuff
to hit mainline first, otherwise I'd suggest we start a second
next/multiplatform-2 branch for imx and send the first part early on
but then wait with the second batch before sound gets in.

It's usually pretty early but Takashi will be on holiday this time so
I'm not sure if things might be different (he was going to send the pull
request from holiday).  I also didn't guarantee that it'll be stable
yet, can someone please tell me what the depenency is here?

On Thu, Sep 20, 2012 at 07:41:50AM -0400, Mark Brown wrote:

It's usually pretty early but Takashi will be on holiday this time so
I'm not sure if things might be different (he was going to send the pull
request from holiday).  I also didn't guarantee that it'll be stable
yet, can someone please tell me what the depenency is here?

We need the patch to have all imx drivers mach/* inclusion free,
so that we can enable multi-platform support for imx, which is the
whole point of the series.

If your for-3.7 is not stable anyway, I guess the easiest the way
to do it might be you drop the patch "ASoC: mx27vis: retrieve gpio
numbers from platform_data" from your tree and I have it be part of
the series to go via arm-soc tree as a whole.  (This is the original
plan that I mentioned in v1 cover letter)

Shawn

On Thu, Sep 20, 2012 at 07:52:15PM +0800, Shawn Guo wrote:

On Thu, Sep 20, 2012 at 07:41:50AM -0400, Mark Brown wrote:

quoted

It's usually pretty early but Takashi will be on holiday this time so
I'm not sure if things might be different (he was going to send the pull
request from holiday).  I also didn't guarantee that it'll be stable
yet, can someone please tell me what the depenency is here?

We need the patch to have all imx drivers mach/* inclusion free,
so that we can enable multi-platform support for imx, which is the
whole point of the series.

That doesn't answer the question.  What is the dependency - what is it
about this patch that something else depends on?  Your cover letters
just say you'd like to do this but don't mention dependencies at all and
when I asked the question last night you said the same thing.  I've not
seen the rest of the series...

If your for-3.7 is not stable anyway, I guess the easiest the way

It probably *is* stable but I'm not enthused about people pulling
unsigned tags.  I might rebase, though - I'm going to finalise the tree
in the next few days.

to do it might be you drop the patch "ASoC: mx27vis: retrieve gpio
numbers from platform_data" from your tree and I have it be part of
the series to go via arm-soc tree as a whole.  (This is the original
plan that I mentioned in v1 cover letter)

You just mentioned it as a preference (you said it's something you'd
like to do), please if you're doing this sort of cross tree thing be
explicit about what the inter-tree relationships are.  If things need to
go in via the same tree say so explicitly (and ideally say way this is).

The main reason I applied it straight away was that Javier mentioned
that it was a bug fix and it's near the merge window and these random
ARM cleanup serieses never seem to go in quickly.

On Thu, Sep 20, 2012 at 08:47:10AM -0400, Mark Brown wrote:

On Thu, Sep 20, 2012 at 07:52:15PM +0800, Shawn Guo wrote:

quoted

On Thu, Sep 20, 2012 at 07:41:50AM -0400, Mark Brown wrote:

quoted

quoted

It's usually pretty early but Takashi will be on holiday this time so
I'm not sure if things might be different (he was going to send the pull
request from holiday).  I also didn't guarantee that it'll be stable
yet, can someone please tell me what the depenency is here?

quoted

We need the patch to have all imx drivers mach/* inclusion free,
so that we can enable multi-platform support for imx, which is the
whole point of the series.

That doesn't answer the question.  What is the dependency - what is it
about this patch that something else depends on?  Your cover letters
just say you'd like to do this but don't mention dependencies at all and
when I asked the question last night you said the same thing.  I've not
seen the rest of the series...

Ah, right.  You did get copied on the whole series.  So the whole point
of patch "ASoC: mx27vis: retrieve gpio numbers from platform_data" is
to get rid of inclusion mach/iomux-mx27.h.  This has to be done before
we enable multi-platform support for imx, since mach/* has to be removed
completely for multi-platform build.

quoted

If your for-3.7 is not stable anyway, I guess the easiest the way

It probably *is* stable but I'm not enthused about people pulling
unsigned tags.  I might rebase, though - I'm going to finalise the tree
in the next few days.

quoted

to do it might be you drop the patch "ASoC: mx27vis: retrieve gpio
numbers from platform_data" from your tree and I have it be part of
the series to go via arm-soc tree as a whole.  (This is the original
plan that I mentioned in v1 cover letter)

You just mentioned it as a preference (you said it's something you'd
like to do), please if you're doing this sort of cross tree thing be
explicit about what the inter-tree relationships are.  If things need to
go in via the same tree say so explicitly (and ideally say way this is).

Ok, my bad.

The main reason I applied it straight away was that Javier mentioned
that it was a bug fix and it's near the merge window and these random
ARM cleanup serieses never seem to go in quickly.

The series is planned for 3.7 merge window.  Is it still possible for
you to drop the patch from your tree to ease the process?  Or I will
hold my pull-request to arm-soc until you tell me you have your tree
finalized.

Shawn

On Thu, Sep 20, 2012 at 07:39:34AM +0000, Arnd Bergmann wrote:

The first five branches are scheduled to go through the arm-soc tree, so
I'm fine with that. For the sound/for-3.7 branch, I'd like to know when
to expect that hitting mainline. If it always gets in very early during the
merge window, it's probably ok to put the imx/multi-platform patches into
the same branch as the other ones in arm-soc and wait for the sound stuff
to hit mainline first, otherwise I'd suggest we start a second
next/multiplatform-2 branch for imx and send the first part early on
but then wait with the second batch before sound gets in.

It seems that we will have to go with next/multiplatform-2.  I just
tried to merge the series with linux-next together, and got some
non-trivial conflicts with media and mtd tree.  I might have to rebase
my series on top of these trees to sort out those conflicts.  That said,
I will have several dependencies outside arm-soc tree, and have to pend
my series until all those trees get merged into mainline.

Shawn

On Thursday 20 September 2012, Shawn Guo wrote:

On Thu, Sep 20, 2012 at 07:39:34AM +0000, Arnd Bergmann wrote:

quoted

The first five branches are scheduled to go through the arm-soc tree, so
I'm fine with that. For the sound/for-3.7 branch, I'd like to know when
to expect that hitting mainline. If it always gets in very early during the
merge window, it's probably ok to put the imx/multi-platform patches into
the same branch as the other ones in arm-soc and wait for the sound stuff
to hit mainline first, otherwise I'd suggest we start a second
next/multiplatform-2 branch for imx and send the first part early on
but then wait with the second batch before sound gets in.

It seems that we will have to go with next/multiplatform-2.  I just
tried to merge the series with linux-next together, and got some
non-trivial conflicts with media and mtd tree.  I might have to rebase
my series on top of these trees to sort out those conflicts.  That said,
I will have several dependencies outside arm-soc tree, and have to pend
my series until all those trees get merged into mainline.

Ok, fair enough. I think we can put it in arm-soc/for-next as a staging
branch anyway to give it some exposure to linux-next, and then we can
decide whether a rebase is necessary before sending it to Linus.

	Arnd

On Thu, Sep 20, 2012 at 03:56:56PM +0000, Arnd Bergmann wrote:

Ok, fair enough. I think we can put it in arm-soc/for-next as a staging
branch anyway to give it some exposure to linux-next, and then we can
decide whether a rebase is necessary before sending it to Linus.

I just saw the announcement from Olof - no more major merge for 3.7
will be accepted from now on.  Can this be an exception or should I
plan this for 3.8?

Shawn

On Fri, Sep 21, 2012 at 1:01 AM, Shawn Guo [off-list ref] wrote:

On Thu, Sep 20, 2012 at 03:56:56PM +0000, Arnd Bergmann wrote:

quoted

Ok, fair enough. I think we can put it in arm-soc/for-next as a staging
branch anyway to give it some exposure to linux-next, and then we can
decide whether a rebase is necessary before sending it to Linus.

I just saw the announcement from Olof - no more major merge for 3.7
will be accepted from now on.  Can this be an exception or should I
plan this for 3.8?

I'll take a look at merging it tomorrow after I've dealt with smp_ops;
if it looks reasonably conflict-free I'll pull it in. We need the
sound dependency sorted out (or agreed upon) first though.


-Olof

Hi Olof,

On Fri, Sep 21, 2012 at 01:26:43AM -0700, Olof Johansson wrote:

I'll take a look at merging it tomorrow after I've dealt with smp_ops;
if it looks reasonably conflict-free I'll pull it in. We need the
sound dependency sorted out (or agreed upon) first though.

I just published the branch below with this series rebased on top of
the necessary dependant branches.

  git://git.linaro.org/people/shawnguo/linux-2.6.git staging/imx-multiplatform

The dependant branches include:

* arm-soc/multiplatform/platform-data

* arm-soc/multiplatform/smp_ops

* git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7

  It contains dependant patch "ASoC: mx27vis: retrieve gpio numbers
  from platform_data"

* git://git.infradead.org/mtd-2.6.git master

  The series is based on this tree to solve some non-trivial conflicts
  on mxc_nand driver.  Because mtd tree completely missed 3.6 merge
  window, having the series base on 3.6-rc actually means 3.5 code base
  in term of mtd support.  There are currently two cycles changes
  accumulated on mtd, and we need to base the series on it to sort out
  the conflicts.

* git://linuxtv.org/mchehab/media-next.git master

  The media tree renames mx2/mx3 camera drivers twice.  I'm not sure
  if git merge can detect them, so I just rebased the series on media
  tree to solve that.  The bonus point is that a number of trivial
  conflicts with imx27-coda support on media tree gets solved as well.

I'm not requesting you to pull the branch into arm-soc as a stable
branch but staging one, because the external dependencies which might
not be stable.  I attempt to use it for exposing the series on
linux-next, so that we can send it to Linus for 3.7 if there is chance
for us to (e.g. all the dependant branches hit mainline early during
3.7 merge window).

Shawn

On Sat, Sep 22, 2012 at 12:46:26AM +0800, Shawn Guo wrote:

I just published the branch below with this series rebased on top of
the necessary dependant branches.

  git://git.linaro.org/people/shawnguo/linux-2.6.git staging/imx-multiplatform

The dependant branches include:

Forgot the base:

  * arm-soc/next/multiplatform

Shawn

* arm-soc/multiplatform/platform-data

* arm-soc/multiplatform/smp_ops

* git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7

  It contains dependant patch "ASoC: mx27vis: retrieve gpio numbers
  from platform_data"

* git://git.infradead.org/mtd-2.6.git master

  The series is based on this tree to solve some non-trivial conflicts
  on mxc_nand driver.  Because mtd tree completely missed 3.6 merge
  window, having the series base on 3.6-rc actually means 3.5 code base
  in term of mtd support.  There are currently two cycles changes
  accumulated on mtd, and we need to base the series on it to sort out
  the conflicts.

* git://linuxtv.org/mchehab/media-next.git master

  The media tree renames mx2/mx3 camera drivers twice.  I'm not sure
  if git merge can detect them, so I just rebased the series on media
  tree to solve that.  The bonus point is that a number of trivial
  conflicts with imx27-coda support on media tree gets solved as well.

I'm not requesting you to pull the branch into arm-soc as a stable
branch but staging one, because the external dependencies which might
not be stable.  I attempt to use it for exposing the series on
linux-next, so that we can send it to Linus for 3.7 if there is chance
for us to (e.g. all the dependant branches hit mainline early during
3.7 merge window).

Hi,

On Fri, Sep 21, 2012 at 9:53 AM, Shawn Guo [off-list ref] wrote:

On Sat, Sep 22, 2012 at 12:46:26AM +0800, Shawn Guo wrote:

quoted

I just published the branch below with this series rebased on top of
the necessary dependant branches.

  git://git.linaro.org/people/shawnguo/linux-2.6.git staging/imx-multiplatform

The dependant branches include:

Forgot the base:

  * arm-soc/next/multiplatform

Shawn

quoted

* arm-soc/multiplatform/platform-data

* arm-soc/multiplatform/smp_ops

* git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7

  It contains dependant patch "ASoC: mx27vis: retrieve gpio numbers
  from platform_data"

* git://git.infradead.org/mtd-2.6.git master

  The series is based on this tree to solve some non-trivial conflicts
  on mxc_nand driver.  Because mtd tree completely missed 3.6 merge
  window, having the series base on 3.6-rc actually means 3.5 code base
  in term of mtd support.  There are currently two cycles changes
  accumulated on mtd, and we need to base the series on it to sort out
  the conflicts.

* git://linuxtv.org/mchehab/media-next.git master

  The media tree renames mx2/mx3 camera drivers twice.  I'm not sure
  if git merge can detect them, so I just rebased the series on media
  tree to solve that.  The bonus point is that a number of trivial
  conflicts with imx27-coda support on media tree gets solved as well.

I'm not requesting you to pull the branch into arm-soc as a stable
branch but staging one, because the external dependencies which might
not be stable.  I attempt to use it for exposing the series on
linux-next, so that we can send it to Linus for 3.7 if there is chance
for us to (e.g. all the dependant branches hit mainline early during
3.7 merge window).

I've pulled this in now as staging/imx-multiplatform.

As you mention, it might or might not make sense to send this up. It
also accrued a few more merge conflicts with other branches in
arm-soc, so we'll see how things play out.

Either way, we'll for sure queue it for 3.8.


-Olof

On Sat, Sep 22, 2012 at 12:41 AM, Olof Johansson [off-list ref] wrote:

Hi,

On Fri, Sep 21, 2012 at 9:53 AM, Shawn Guo [off-list ref] wrote:

quoted

On Sat, Sep 22, 2012 at 12:46:26AM +0800, Shawn Guo wrote:

quoted

I just published the branch below with this series rebased on top of
the necessary dependant branches.

  git://git.linaro.org/people/shawnguo/linux-2.6.git staging/imx-multiplatform

The dependant branches include:

Forgot the base:

  * arm-soc/next/multiplatform

Shawn

quoted

* arm-soc/multiplatform/platform-data

* arm-soc/multiplatform/smp_ops

* git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7

  It contains dependant patch "ASoC: mx27vis: retrieve gpio numbers
  from platform_data"

* git://git.infradead.org/mtd-2.6.git master

  The series is based on this tree to solve some non-trivial conflicts
  on mxc_nand driver.  Because mtd tree completely missed 3.6 merge
  window, having the series base on 3.6-rc actually means 3.5 code base
  in term of mtd support.  There are currently two cycles changes
  accumulated on mtd, and we need to base the series on it to sort out
  the conflicts.

* git://linuxtv.org/mchehab/media-next.git master

  The media tree renames mx2/mx3 camera drivers twice.  I'm not sure
  if git merge can detect them, so I just rebased the series on media
  tree to solve that.  The bonus point is that a number of trivial
  conflicts with imx27-coda support on media tree gets solved as well.

I'm not requesting you to pull the branch into arm-soc as a stable
branch but staging one, because the external dependencies which might
not be stable.  I attempt to use it for exposing the series on
linux-next, so that we can send it to Linus for 3.7 if there is chance
for us to (e.g. all the dependant branches hit mainline early during
3.7 merge window).

I've pulled this in now as staging/imx-multiplatform.

As you mention, it might or might not make sense to send this up. It
also accrued a few more merge conflicts with other branches in
arm-soc, so we'll see how things play out.

Either way, we'll for sure queue it for 3.8.

Hmm. Pulling it in gives me a few new build errors, in particular on
the configs that Russell use to build test omap3, as well as one of
his vexpress configs. So I dropped it again for now.

Let's have the current contents sit in linux-next for at least one
release before we bring in anything more, especially since it brings
in dependencies on external trees, and it also has a handful of new
merge conflicts. We're already exposing Stephen Rothwell to more merge
conflicts than I'm entirely comfortable with.


-Olof

On Sat, Sep 22, 2012 at 01:09:27AM -0700, Olof Johansson wrote:

quoted

I've pulled this in now as staging/imx-multiplatform.

As you mention, it might or might not make sense to send this up. It
also accrued a few more merge conflicts with other branches in
arm-soc, so we'll see how things play out.

Either way, we'll for sure queue it for 3.8.

Hmm. Pulling it in gives me a few new build errors, in particular on
the configs that Russell use to build test omap3, as well as one of
his vexpress configs. So I dropped it again for now.

Let's have the current contents sit in linux-next for at least one
release before we bring in anything more, especially since it brings
in dependencies on external trees, and it also has a handful of new
merge conflicts. We're already exposing Stephen Rothwell to more merge
conflicts than I'm entirely comfortable with.

Ok.  I will rebase the series against 3.7-rc1 and then send you then.

Shawn

On Fri, Sep 21, 2012 at 01:26:43AM -0700, Olof Johansson wrote:

I'll take a look at merging it tomorrow after I've dealt with smp_ops;
if it looks reasonably conflict-free I'll pull it in. We need the
sound dependency sorted out (or agreed upon) first though.

I guess in the light of the rest of the thread it doesn't much matter
for this merge window but I just pushed:

 git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-3.7

which is signed so can happily be merged elsewhere.