[PATCHv3 2/5] OMAP: RX51: Add "vdds_sdi" supply voltage for SDI
From: Roger Quadros <hidden>
Date: 2010-04-15 12:06:18
Also in:
linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
From: Roger Quadros <redacted> The SDI Display subsystem needs access to the vdds_sdi supply regulator. This is TWL4030's VAUX1 supply on RX-51. Signed-off-by: Roger Quadros <redacted> --- arch/arm/mach-omap2/board-rx51-peripherals.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f404537..3ef805e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c@@ -300,6 +300,19 @@ static struct regulator_consumer_supply rx51_vsim_supply = { .dev_name = "mmci-omap-hs.1", }; +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) +extern struct platform_device rx51_display_device; +#endif + +static struct regulator_consumer_supply rx51_vaux1_consumers[] = { +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + { + .supply = "vdds_sdi", + .dev = &rx51_display_device.dev, + }, +#endif +}; + static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28",
@@ -310,6 +323,8 @@ static struct regulator_init_data rx51_vaux1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), + .consumer_supplies = rx51_vaux1_consumers, }; static struct regulator_init_data rx51_vaux2 = {
--
1.6.0.4