Valentin Longchamp wrote:

Ok let's get back to this point. The initcall_debug=1 boot option helped
a lot (thanks Russel). So all initcalls correctly are called ipu_init
inclusive (my pr_debug calls did show nothing even with the debug and
dynamic_printk option, so I thought initcalls were not called ... I
don't understand what happened here)

I undestrand what happened: dynamic_printk also are enabled by an
initcall, and this initcall happens AFTER the ipu_init inicall, so the
dynamic_printks are not enabled when I try to output something in the
ipu_init (so all my pr_debug output were silent).

Val

-- 
Valentin Longchamp, PhD Student, EPFL-STI-LSRO1
valentin.longchamp@epfl.ch, Phone: +41216937827
http://people.epfl.ch/valentin.longchamp
MEA3485, Station 9, CH-1015 Lausanne

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword