Op 4 nov 2008, om 17:10 heeft Tomi Valkeinen het volgende geschreven:

Signed-off-by: Tomi Valkeinen <redacted>
---

arch/arm/mach-omap2/board-omap3beagle.c |  121 ++++++++++++++++++++++ 
++++++---
1 files changed, 108 insertions(+), 13 deletions(-)

+static struct omap_display_data beagle_display_data_dvi = {
+	.type = OMAP_DISPLAY_TYPE_DPI,
+	.name = "dvi",
+	.panel_name = "panel-dvi",
+	.u.dpi.data_lines = 24,
+	.panel_reset_gpio = 170,
+	.panel_enable = beagle_enable_dvi,
+	.panel_disable = beagle_disable_dvi,

gpio 170 is the enable (or disable, I forget which) for the DVI framer  
(TFP410), not a reset gpio. It would be nice to have a way to enable/ 
disable the framer  from userspace since it burns 60-100mA.

regards,

Koen