Michel Dänzer wrote:

On Fri, 2008-08-29 at 00:16 +0200, Helge Deller wrote:

quoted

Michel Dänzer wrote:

quoted

On Thu, 2008-08-28 at 23:43 +0200, Helge Deller wrote:

quoted

Your idea about testing a few mode lines is normally a good idea.

My idea is quite the opposite - to try *without* even the Modes line in
SubSection "Display". Can you try that please?

Doesn't work either.

a) If I drop the "monitor" line in the Screen section it chooses a 

[...]

quoted

b) If I just drop the HorizSync and VertRefresh entries, it fails as well:

[...]

Which part of 'the Modes line in SubSection "Display"' is so hard to
understand? *shrug*

Do you want me to change this (1024x768): ?
	SubSection "Display"
                 Depth           8
                 Modes           "1024x768"
         EndSubSection

Why?
There is no reason.
The hardware can only run at 1024x768 at 8bpp.
If I change this, it will clearly fail.
No need to try as the answer is clear.

Reason:
root@c3000:/usr/lib/xorg/modules/linux# fbset -i

mmode "1024x768"
     geometry 1024 768 1024 768 8
     timings 0 0 0 0 0 0 0
     rgba 8/0,8/0,8/0,0/0
endmode

Frame buffer device information:
     Name        : stifb
     Address     : 0xf9000000
     Size        : 1572864
     Type        : PACKED PIXELS
     Visual      : PSEUDOCOLOR
     XPanStep    : 0
     YPanStep    : 0
     YWrapStep   : 0
     LineLength  : 2048
     MMIO Address: 0xf8100000
     MMIO Size   : 4194304
     Accelerator : No

Helge

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel