On Tue, 19 Aug 2008 17:06:40 +0200
Sascha Hauer [off-list ref] wrote:
Remove the gpio mux setup function from i.MX framebuffer driver.
This function is platform specific and thus should be done by
the board setup. As there are currently no in-kernel users
of this driver we do not break anything.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
Acked-by: Krzysztof Helt <redacted>
This is patch type I like the most: only deletions.
Please number your patches with [PATCH 1/4], [PATCH 2/4], etc.
in next repost. Please also add line From: and description
to each patch.
quoted hunk ↗ jump to hunk
drivers/video/imxfb.c | 53 -------------------------------------------------
1 files changed, 0 insertions(+), 53 deletions(-)
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index ccd9861..a990d43 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -357,57 +357,6 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
return 0;
}
-static void imxfb_setup_gpio(struct imxfb_info *fbi)
-{
- int width;
-
- LCDC_RMCR &= ~(RMCR_LCDC_EN | RMCR_SELF_REF);
-
- if( fbi->pcr & PCR_TFT )
- width = 16;
- else
- width = 1 << ((fbi->pcr >> 28) & 0x3);
-
- switch(width) {
- case 16:
- imx_gpio_mode(PD30_PF_LD15);
- imx_gpio_mode(PD29_PF_LD14);
- imx_gpio_mode(PD28_PF_LD13);
- imx_gpio_mode(PD27_PF_LD12);
- imx_gpio_mode(PD26_PF_LD11);
- imx_gpio_mode(PD25_PF_LD10);
- imx_gpio_mode(PD24_PF_LD9);
- imx_gpio_mode(PD23_PF_LD8);
- case 8:
- imx_gpio_mode(PD22_PF_LD7);
- imx_gpio_mode(PD21_PF_LD6);
- imx_gpio_mode(PD20_PF_LD5);
- imx_gpio_mode(PD19_PF_LD4);
- case 4:
- imx_gpio_mode(PD18_PF_LD3);
- imx_gpio_mode(PD17_PF_LD2);
- case 2:
- imx_gpio_mode(PD16_PF_LD1);
- case 1:
- imx_gpio_mode(PD15_PF_LD0);
- }
-
- /* initialize GPIOs */
- imx_gpio_mode(PD6_PF_LSCLK);
- imx_gpio_mode(PD11_PF_CONTRAST);
- imx_gpio_mode(PD14_PF_FLM_VSYNC);
- imx_gpio_mode(PD13_PF_LP_HSYNC);
- imx_gpio_mode(PD12_PF_ACD_OE);
-
- /* These are only needed for Sharp HR TFT displays */
- if (fbi->pcr & PCR_SHARP) {
- imx_gpio_mode(PD7_PF_REV);
- imx_gpio_mode(PD8_PF_CLS);
- imx_gpio_mode(PD9_PF_PS);
- imx_gpio_mode(PD10_PF_SPL_SPR);
- }
-}
-
#ifdef CONFIG_PM
/*
* Power management hooks. Note that we won't be called from IRQ context,@@ -594,8 +543,6 @@ static int __init imxfb_probe(struct platform_device *pdev)
if (ret < 0)
goto failed_cmap;
- imxfb_setup_gpio(fbi);
-
imxfb_set_par(info);
ret = register_framebuffer(info);
if (ret < 0) {--
1.5.6.3
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
----------------------------------------------------------------------
Taniej na zagraniczne komorki!
Sprawdz >>> http://link.interia.pl/f1ee3
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/