Ensure that the default display parameter passed in via the
device's platform data is valid. It turns out when mach-bast.c
was updated, the default_display was set outside of the display
array bounds, causing a panic on startup.
If the default_display is bigger than num_displays, then generate
an error and refuse to initialise the driver.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Index: linux-2.6.23-quilt5/drivers/video/s3c2410fb.c
===================================================================
--- linux-2.6.23-quilt5.orig/drivers/video/s3c2410fb.c
+++ linux-2.6.23-quilt5/drivers/video/s3c2410fb.c
@@ -817,6 +817,12 @@ static int __init s3c24xxfb_probe(struct
return -EINVAL;
}
+ if (mach_info->default_display >= mach_info->num_displays) {
+ dev_err(&pdev->dev, "default is %d but only %d displays\n",
+ mach_info->default_display, mach_info->num_displays);
+ return -EINVAL;
+ }
+
display = mach_info->displays + mach_info->default_display;
irq = platform_get_irq(pdev, 0);
--
Ben (ben@fluff.org, http://www.fluff.org/)
'a smiley only costs 4 bytes'
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/