Justin Piszcz wrote:

On Sat, 27 Feb 2010, Bill Davidsen wrote:

quoted

Justin Piszcz wrote:

quoted

On Sun, 28 Feb 2010, Neil Brown wrote:

quoted

On Sat, 27 Feb 2010 08:47:48 -0500 (EST)
Justin Piszcz [off-list ref] wrote:

quoted

Hello,

I have two separate systems and with ext4 I cannot get speeds 
greater than
~350MiB/s when using ext4 as the filesystem on top of a raid5 or 
raid0.
It appears to be a bug with ext4 (or its just that ext4 is slower 
for this
test)?

Each system runs 2.6.33 x86_64.

Could be related to the recent implementation of IO barriers in md.
Can you try mounting your filesystem with
  -o barrier=0

and see how that changes the result.

NeilBrown

Hi Neil,

Thanks for the suggestion, it has been used here:
http://lkml.org/lkml/2010/2/27/66

Looks like an EXT4 issue as XFS does ~600MiB/s..?

Its strange though, on a single hard disk, I get approximately the 
same speed for XFS and EXT4, but when it comes to scaling across 
multiple disks,
in RAID-0 or RAID-5 (tested), there is a performance problem as it 
hits a
performance problem at ~350MiB/s.  I tried multiple chunk sizes but 
nothing
seemed to made a difference (whether 64KiB or 1024KiB), XFS performs at
500-600MiB/s no matter what and EXT4 does not exceed ~350MiB/s.

Is there anyone on any of the lists that gets > 350MiB/s on a 
mdadm/sw raid
with EXT4?

A single raw disk, no partitions:
p63:~# dd if=/dev/zero of=/dev/sdm bs=1M count=10240
10240+0 records in
10240+0 records out
10737418240 bytes (11 GB) copied, 92.4249 s, 116 MB/s

I hate to say it, but I don't think this measures anything useful. 
When I was doing similar things I got great variabilty in my results 
until I learned about the fdatasync option so you measure the actual 
speed to the destination and not the disk cache. After that my 
results were far slower and reproducible.

fdatasync:
http://lkml.indiana.edu/hypermail/linux/kernel/1002.3/01507.html

I wasn't expecting a huge change in value, your data size is large. But 
thanks, the total time without sync can be off by at least seconds, 
making it hard to duplicate results. You missed nothing this time.

Did you use any of the options with ext4? I found about 15-20% with 
options, but I didn't take good enough notes to quote now. :-(
That doesn't mean there wasn't more, I tested on FC9, ext4 was 
experimental then.

-- 
Bill Davidsen [off-list ref]
  "We can't solve today's problems by using the same thinking we
   used in creating them." - Einstein