Re: [PATCH 1/3] dt-bindings: usb: dwc3: document snps,reinit-phy-on-resume

Add the documentation for the 'snps,reinit-phy-on-resume' boolean
property. When set, the DWC3 core will perform a full phy_exit() +
phy_init() cycle on each USB2 PHY during the host-mode fast resume
path. This is needed on platforms where the USB2 PHY power domain
is gated during deep sleep even when device_may_wakeup is true.

Signed-off-by: Oliver White <redacted>
---
 .../devicetree/bindings/usb/snps,dwc3-common.yaml      | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
index 6c0b8b653824..d12f6ae81ab8 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3-common.yaml

@@ -212,6 +212,16 @@ properties:
       When set, run the SOF/ITP counter based on ref_clk.
     type: boolean
 
+  snps,reinit-phy-on-resume:
+    description:
+      When set, the DWC3 will re-initialize the USB2 PHYs during the
+      host-mode fast resume path (device_may_wakeup). Some platforms
+      cut PHY power during deep sleep even when USB wake is enabled,
+      and the standard PHY runtime PM resume is insufficient to restore
+      the PHY register state. This quirk forces a full phy_exit() +
+      phy_init() cycle on each USB2 PHY.
+    type: boolean