From: Taniya Das <redacted>

Recent QCOM PLLs require the CAL_L field to be programmed according to
specific hardware recommendations, rather than using the legacy default
value of 0x44. Hardcoding this value can lead to suboptimal or incorrect
behavior on newer platforms.

To address this, introduce a `cal_l` field in the PLL configuration
structure, allowing CAL_L to be set explicitly based on platform
requirements. This improves flexibility and ensures correct PLL
initialization across different hardware variants.

Signed-off-by: Taniya Das <redacted>
Signed-off-by: Jingyi Wang <redacted>
---
 drivers/clk/qcom/clk-alpha-pll.c | 6 +++++-
 drivers/clk/qcom/clk-alpha-pll.h | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 6aeba40358c1..6f50f0c4b984 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c

@@ -2338,7 +2338,11 @@ void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regma
 		return;
 	}
 
-	lval |= TRION_PLL_CAL_VAL << LUCID_EVO_PLL_CAL_L_VAL_SHIFT;
+	if (config->cal_l)
+		lval |= config->cal_l << LUCID_EVO_PLL_CAL_L_VAL_SHIFT;
+	else
+		lval |= TRION_PLL_CAL_VAL << LUCID_EVO_PLL_CAL_L_VAL_SHIFT;
+
 	clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), lval);
 	clk_alpha_pll_write_config(regmap, PLL_ALPHA_VAL(pll), config->alpha);
 	clk_alpha_pll_write_config(regmap, PLL_CONFIG_CTL(pll), config->config_ctl_val);

diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 0903a05b18cc..ec5b4e481030 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h

@@ -128,6 +128,7 @@ struct clk_alpha_pll_postdiv {
 
 struct alpha_pll_config {
 	u32 l;
+	u32 cal_l;
 	u32 alpha;
 	u32 alpha_hi;
 	u32 config_ctl_val;

-- 
2.25.1