Re: [PATCH] arm64: tegra: Remove otg id gpio from Jetson TX2 NX
From: Jon Hunter <jonathanh@nvidia.com>
Date: 2025-09-17 13:36:45
Also in:
linux-tegra, lkml
On 13/05/2025 22:10, Aaron Kling via B4 Relay wrote:
From: Aaron Kling <redacted> The p3509 carrier board does not connect the id gpio. Prior to this, the gpio role switch driver could not detect the mode of the otg port.
We should add a fixes tag here.
quoted hunk ↗ jump to hunk
Signed-off-by: Aaron Kling <redacted> --- arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts | 1 - 1 file changed, 1 deletion(-)diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 26f71651933d1d8ef32bbd1645cac1820bd2e104..81f204e456409df355bbcb691ef99b0d0c9d504e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts@@ -669,7 +669,6 @@ connector { vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_LOW>; - id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; }; };
Otherwise looks good to me. Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Cheers Jon -- nvpublic