Thread (10 messages) 10 messages, 4 authors, 2025-10-20

Re: [PATCH] arm64: tegra: Remove otg id gpio from Jetson TX2 NX

From: Aaron Kling <hidden>
Date: 2025-07-14 05:35:37
Also in: linux-tegra, lkml

On Mon, Jun 30, 2025 at 2:27 PM Aaron Kling [off-list ref] wrote:
On Wed, May 28, 2025 at 12:42 PM Aaron Kling [off-list ref] wrote:
quoted
On Tue, May 13, 2025 at 4:10 PM Aaron Kling via B4 Relay
[off-list ref] wrote:
quoted
From: Aaron Kling <redacted>

The p3509 carrier board does not connect the id gpio. Prior to this, the
gpio role switch driver could not detect the mode of the otg port.

Signed-off-by: Aaron Kling <redacted>
---
 arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts | 1 -
 1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 26f71651933d1d8ef32bbd1645cac1820bd2e104..81f204e456409df355bbcb691ef99b0d0c9d504e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -669,7 +669,6 @@ connector {
                                        vbus-gpios = <&gpio
                                                      TEGRA186_MAIN_GPIO(L, 4)
                                                      GPIO_ACTIVE_LOW>;
-                                       id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
                                };
                        };

---
base-commit: 405e6c37c89ef0df2bfc7a988820a3df22dacb1b
change-id: 20250513-tx2nx-role-switch-37ec55d25189

Best regards,
--
Aaron Kling [off-list ref]
Friendly reminder about this patch.
Re-reminder about this patch.
Yet another reminder about this patch. It's been over two months
without a response and many other patches have been pulled in the
meantime.

Aaron
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help