On Wed, Sep 03, 2025 at 03:16:55PM +0300, Dmitry Baryshkov wrote:

On Wed, Sep 03, 2025 at 05:17:06PM +0530, Wasim Nazir wrote:

quoted

From: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>

Enable GPI DMA controllers (gpi_dma0, gpi_dma1, gpi_dma2) and QUPv3
interfaces (qupv3_id_0, qupv3_id_2) in the device tree to support
DMA and peripheral communication on the Lemans EVK platform.

Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Wasim Nazir <redacted>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index c60629c3369e..196c5ee0dd34 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts

@@ -277,6 +277,18 @@ vreg_l8e: ldo8 {
 	};
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &i2c18 {
 	status = "okay";
 

@@ -367,10 +379,18 @@ &mdss0_dp1_phy {
 	status = "okay";
 };
 
+&qupv3_id_0 {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
 
+&qupv3_id_2 {
+	status = "okay";
+};

You've added i2c18 device in patch 1, but it could not be enabled before
this one because it's a part of QUP2.

Thanks for pointing this, I will update it in next series.

quoted

+
 &sleep_clk {
 	clock-frequency = <32768>;
 };

-- 
2.51.0

-- 
With best wishes
Dmitry

-- 
Regards,
Wasim