[PATCH 26/38] arm64: dts: mediatek: acelink-ew-7886cax: Remove unnecessary cells in spi-nand
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: 2025-07-24 08:40:35
Also in:
dri-devel, linux-crypto, linux-gpio, linux-media, linux-mediatek, linux-phy, linux-remoteproc, linux-sound, lkml
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
There is no need to specify #address-cells and #size-cells in a node that has only one non-addressable subnode, and this is the case of the flash@0 node in this devicetree, as it has only one "partitions" subnode. Remove those to suppress an avoid_unnecessary_addr_size warning. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
index 08b3b0827436..30805a610262 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts@@ -98,8 +98,6 @@ &spi0 { flash@0 { compatible = "spi-nand"; reg = <0>; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <52000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>;
--
2.50.1