Re: [PATCH v5 3/4] arm64: dts: qcom: sa8775p: remove aux clock from pcie phy

On 7/18/25 12:02 PM, Johan Hovold wrote:

On Fri, Jul 18, 2025 at 04:17:17PM +0800, Ziyue Zhang wrote:

quoted

gcc_aux_clk is used in PCIe RC and it is not required in pcie phy, in
pcie phy it should be gcc_phy_aux_clk, so remove gcc_aux_clk and
replace it with gcc_phy_aux_clk.

Expanding on why this is a correct change would be good since this does
not yet seem to have been fully resolved:

	https://lore.kernel.org/lkml/98088092-1987-41cc-ab70-c9a5d3fdbb41@oss.qualcomm.com/ (local)

I dug out some deep memories and recalled that _PHY_AUX_CLK was
necessary on x1e for the Gen4 PHY to initialize properly. This
can be easily reproduced:

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index a9a7bb676c6f..d5ef6bef2b23 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi

@@ -3312,7 +3312,7 @@ pcie3_phy: phy@1be0000 {
                        compatible = "qcom,x1e80100-qmp-gen4x8-pcie-phy";
                        reg = <0 0x01be0000 0 0x10000>;
 
-                       clocks = <&gcc GCC_PCIE_3_PHY_AUX_CLK>,
+                       clocks = <&gcc GCC_PCIE_3_AUX_CLK>,
                                 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
                                 <&tcsr TCSR_PCIE_8L_CLKREF_EN>,
                                 <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>,

==>
[    6.967231] qcom-qmp-pcie-phy 1be0000.phy: phy initialization timed-out
[    6.974462] phy phy-1be0000.phy.0: phy poweron failed --> -110

And the (non-PHY_)AUX_CLK is necessary for at least one of them, as
removing it causes a crash on boot

Konrad