On Sat, 15 Feb 2025 00:22:20 +0100
Linus Walleij [off-list ref] wrote:

Let's check with Jonathan Cameron (IIO maintainer) on this as well.
He might have ideas.

For reference, the datasheet:
https://www.analog.com/media/en/technical-documentation/data-sheets/adg1414.pdf

(By the way: add the datasheet to a special Datasheet: tag in the
commit please!)

On Fri, Feb 14, 2025 at 2:17 PM Nuno Sá [off-list ref] wrote:

quoted

On Fri, 2025-02-14 at 00:25 +0100, Linus Walleij wrote:  

quoted

quoted

Now, the kernel does not have switch subsystem I think,
so this is something like a special case, so we might be
compelled to make an exception, if the users will all be in  

Exactly, since we could not find anything, the best fit seemed like the gpio
subsystem. I was the one suggesting it since a new subsystem for a simple device
like this looked excessive. If we had more devices that would fit such a class
of devices, maybe it would make more sense to start thinking on such a
subsystem?
 

quoted

say userspace and make use of this switch for factory lines
or similar.  

Kim should know better again (about usecases) but I would also assume this is
for userspace use.  

Actually the GPIO documentation Documentation/driver-api/gpio/using-gpio.rst
even talks about this for userspace use cases:

"The userspace ABI is intended for one-off deployments. Examples are prototypes,
factory lines, maker community projects, workshop specimen, production tools,
industrial automation, PLC-type use cases, door controllers, in short a piece
of specialized equipment that is not produced by the numbers, requiring
operators to have a deep knowledge of the equipment and knows about the
software-hardware interface to be set up. They should not have a natural fit
to any existing kernel subsystem and not be a good fit for an operating system,
because of not being reusable or abstract enough, or involving a lot of non
computer hardware related policy."

If this is the usecase, like controlling an external switch for such things,
using the GPIO subsystem might actually be reasonable in my opinion,
(even if the DT bindings end up in their own category).

If the switches control stuff related to computer machinery (i.e. integrated
into a laptop to switch on/off the fans...) then no. So it depends on how
and where it will be used.

Maybe, treat them as a weird mux? A switch is similar to a mux with only
one connected path.  +CC Peter. 

Jonathan

Yours,
Linus Walleij