[PATCH v2 1/8] dt-bindings: qcom: geni-se: Add 'firmware-name' property for firmware loading
flat view
STALE590d
SUPERSEDED
From: Viken Dadhaniya <hidden>
Date: 2025-01-24 10:53:28
Also in:
linux-arm-msm, linux-i2c, linux-serial, linux-spi, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, open firmware and flattened device tree bindings, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 4 in this series.
Revisions (4)
- v1 [diff vs current]
- v2 current
- v3 [diff vs current]
- v4 [diff vs current]
Document the 'firmware-name' property in the device tree bindings to support loading SE (Serial Engine) firmware from the protocol driver, allowing for more flexible firmware management. Co-developed-by: Mukesh Kumar Savaliya <redacted> Signed-off-by: Mukesh Kumar Savaliya <redacted> Signed-off-by: Viken Dadhaniya <redacted> --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index 7b031ef09669..3e029d4d6f58 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml@@ -54,6 +54,10 @@ properties: dma-coherent: true + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: Specify the name of the QUP firmware to load. + required: - compatible - reg
@@ -135,6 +139,7 @@ examples: #address-cells = <2>; #size-cells = <2>; ranges; + firmware-name = "qcom/sa8775p/qupv3fw.elf"; i2c0: i2c@a94000 { compatible = "qcom,geni-i2c";
--
2.34.1