[PATCH v4 17/38] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
From: Dmitry Baryshkov <hidden>
Date: 2023-08-27 01:00:50
Also in:
linux-arm-msm, linux-iio, linux-input, linux-leds
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Signed-off-by: Dmitry Baryshkov <redacted> --- arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 2 -- 3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 4641b4f2195d..43149c90c4fc 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts@@ -88,6 +88,10 @@ clk-pins { }; }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_keypad { linux,keymap = < MATRIX_KEY(0, 0, KEY_VOLUMEUP)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c287498..9e203164beb6 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts@@ -84,6 +84,10 @@ clk-pins { }; }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + &rpm { regulators { compatible = "qcom,rpm-pm8921-regulators";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index ea2d961b266b..f1267c83d67a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi@@ -266,8 +266,6 @@ ssbi@500000 { pm8921: pmic { compatible = "qcom,pm8921"; - interrupt-parent = <&msmgpio>; - interrupts = <104 IRQ_TYPE_LEVEL_LOW>; #interrupt-cells = <2>; interrupt-controller; #address-cells = <1>;
--
2.39.2