Hi Arınç,

On Fri, Feb 10, 2023 at 6:47 PM Arınç ÜNAL [off-list ref] wrote:

Could you also change the node name to watchdog@100? make dtbs_check
points it out:

wdt@100: $nodename:0: 'wdt@100' does not match '^watchdog(@.*|-[0-9a-f])?$'

Sure, let me add a small patch fixing this warning in the series.

Thanks.
Arınç

Best regards,
    Sergio Paracuellos

On 10.02.2023 20:38, Sergio Paracuellos wrote:

quoted

To allow to access system controller registers from watchdog driver code
add a phandle in the watchdog 'wdt' node. This avoid using arch dependent
operations in driver code.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
  arch/mips/boot/dts/ralink/mt7621.dtsi | 1 +
  1 file changed, 1 insertion(+)

diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 5ca40fd21..764916eaf 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi

@@ -73,6 +73,7 @@ sysc: syscon@0 {
              wdt: wdt@100 {
                      compatible = "mediatek,mt7621-wdt";
                      reg = <0x100 0x100>;
+                     mediatek,sysctl = <&sysc>;
              };

              gpio: gpio@600 {